Karakterler

Leash Holder 3D Models and STL Files for 3D Printing

This collection gathers 3D models for leash holders: wall hooks, multi-hook racks and small hanging organizers. Most files are prepared for FDM 3D printing and arrive as STL meshes or similar formats. It helps you find a holder that fits your wall, your leash and the space by the door. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 39 model 2 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 1186 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 1186 model
Kategori hakkında

«Leash Holder 3D Models and STL Files for 3D Printing»

The models differ mainly in how they attach and how much they carry. Single hooks are compact and take one leash, while racks spread several hooks along a plate and often add a shelf or pegs for keys. Decorative versions imitate figures or pendants, and a few designs are built around a printed test piece so you can check the hook opening before committing to the full part.

Before printing, look at the fixing method the author describes: screw holes, keyhole slots or a flat back for tape. Check the wall thickness of the plate, the diameter and spacing of the holes, and the direction the load pulls on the hook, since a hook printed flat on the bed behaves differently from one printed upright. Read the material and settings listed on the model page, and look at photos of real prints to judge layer lines and overhangs that may need supports.

To widen the search, try synonyms such as leash hook, dog lead holder, key rack, coat hook or wall organizer, and combine them with the room or the object, for example entryway or hallway. Related topics that often appear alongside are pet accessories, dog walking gear and small home storage. If a result is close but not exact, open the author's page and check the dimensions before deciding whether to scale it in the slicer.

FAQ

Sıkça sorulan sorular

What should I check before printing a leash holder?
Look at the fixing method, the screw hole diameter and spacing, and the thickness of the back plate. Photos of real prints on the model page show how the hook and any overhangs actually come out.
Which material works for a wall hook?
PLA is common for light indoor loads, while PETG is often chosen where more toughness or flex is wanted. Follow the material and settings the author lists on the model page.
Can I scale a leash holder model?
Scaling changes the hook opening and the screw holes at the same time, so a scaled part may no longer fit your fixings. Adjust it in the slicer and print a small test piece first.
Do these models need supports?
It depends on the orientation and on how the hook overhangs the plate. The author's page usually states the intended orientation and whether supports are part of the recommended setup.
İlgili
Karakterler

Tyberos-Inspired 3D Models for Tabletop

1348 model
Karakterler

WAGO Holders, Wagons and Wig-Wag STL Models

21532 model
Karakterler

Capoo Figures, Holders and Masks: 3D Models

11347 model
Karakterler

Deadpool 3D Models: STL Figures for 3D Printing

2180 model
Karakterler

Scuba Diver 3D Models and STL Files

1809 model
Karakterler

River Otter 3D Models: Flexi, Figurines and STL Skulls

7489 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç