Yazıcı parçaları

Coil and Spool Spacer STL Models for 3D Printing

This collection gathers STL models for coil and spool spacers, spring shims, and metric gap fillers. It helps you find a small part that matches a specific gap, mount, or reel width. Check dimensions and assembly notes before 3D printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 4963 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 4963 model
Kategori hakkında

«Coil and Spool Spacer STL Models for 3D Printing»

Coil spacers sit between a coil and its bracket, housing, or support, while spool spacers set reel width, pressure, or hub position. Spring and suspension spacers adjust preload or length, and metric spacer sets fill gaps around bolts and shafts. They differ by load, fit, and whether the part needs to flex or stay rigid.

When choosing a model, check inner and outer diameter, thickness, slot or keying, screw size, and clearance. On the author's model page, look at the number of parts, assembly order, whether supports are needed, the listed material and settings, and photos of real prints. For spool parts, confirm hub diameter and spring direction; for coil parts, confirm mounting hole spacing and wire clearance.

To refine the search, try synonyms such as shim, washer, adapter, standoff, bushing, insert, reel spacer, coil mount, and spring seat. Combine those terms with a device type, spool type, or dimensions. Related topics include filament spool adapters, coil brackets, suspension tuning, and metric hardware.

FAQ

Sıkça sorulan sorular

What is a coil spacer used for?
It fills a gap between a coil and its mount or housing, or sets distance between parts. The exact use depends on the model and the author's description.
How do I choose the right spacer size?
Measure the gap, inner and outer diameter, and screw or hub size. Compare those measurements with the dimensions listed on the model page.
Do spool spacers fit every filament spool?
No, spool hubs and widths vary. Check the hub diameter, spool width, and any spring or pressure parts shown by the author.
Can I scale a spacer model to fit?
Scaling changes wall thickness and hole sizes, so it may affect fit. Check the author's notes and test the dimensions before printing the final part.
İlgili
Alet ve ekipman

3D Models of Spacers and Standoffs to Print

376442 model
Nesneler

3D Models for Spools, Coils and Filament Storage

109587 model
Yazıcı parçaları

3D Models for Coil and Spool Stands

533845 model
Yazıcı parçaları

3D Models for Filament Spool Holders and Mounts

577679 model
Yazıcı parçaları

Spool Holder 3D Models for 3D Printing

14441 model
Yazıcı parçaları

3D Models for 4-Spool Holders and Filament Racks

12692 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç