Yazıcı parçaları

3D Models for PTFE Tube Frames and Mounts

This collection gathers STL files for PTFE tube frames, guides, and holders used around 3D printer frames and extruder setups. You will also find VESA mount frames, FPV drone frames, and scale model frames that share similar bracket and mounting ideas. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 43 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 1959 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 1959 model
Kategori hakkında

«3D Models for PTFE Tube Frames and Mounts»

PTFE tube guides and holders often differ by tube diameter, mounting angle, and whether they clamp to a frame or sit on a bracket. VESA mount frames are built around screen or board hole patterns, while FPV drone frames and scale model frames focus on plate thickness and arm geometry. Diorama and windscreen frames are more about display proportions than mechanical support.

Before printing, check the author's notes for tube diameter, screw sizes, and the number of parts in the assembly. Look at photos of real prints to judge how the mount sits against a frame and whether supports are needed. Material and layer height matter for thin brackets, so compare the settings the author lists with your own 3D printer.

You can refine the search with terms such as PTFE tube holder, filament guide, tube clamp, VESA mount frame, or FPV frame. Related topics include extruder mounts, cable guides, and frame brackets for specific printer sizes. If a result is close but not exact, try synonyms like guide, holder, bracket, or mount.

FAQ

Sıkça sorulan sorular

What measurements should I check for a PTFE tube frame?
Check the tube outer diameter, the mounting hole spacing, and the thickness of the frame or panel it attaches to. The author's page often lists these details.
Do these models need supports?
It depends on the shape: some brackets print flat without supports, while angled guides may need them. Review the author's photos and notes before slicing.
Can I use these frames with different printers?
Many mounts are designed around a specific tube size or hole pattern, so compare dimensions rather than assuming a direct fit. Scaling may change screw holes and tube grip.
How do I find related models?
Search for filament guide, tube holder, VESA bracket, or frame mount. Adding your printer or device type can narrow the results.
İlgili
Yazıcı parçaları

PTFE Tube Guides and Frame STL Models for 3D Printing

2443 model
Taşıtlar

Fog Light Frames for Vesta: 3D Models and STL Files

12198 model
Taşıtlar

Ford Mondeo 3 Fog Light Frames: 3D Models and STL

1175556 model
Alet ve ekipman

PTF and PTFE 3D Models: Tubes, Brackets, Adapters

9285 model
Taşıtlar

Lada Vesta 3D Models and STL Files for 3D Printing

998 model
Yazıcı parçaları

Lada Fog Light Adapters: 3D Models and STL Files

576 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç