Ev ve yaşam

3D Models of Handles and Grips for 3D Printing

This collection gathers 3D models for handles and grips, from workshop tool handles and scraper grips to cabinet pulls, lid handles and long rails. The files come from several platforms, so you can compare shapes and mounting ideas in one place. It is a practical starting point if you need a replacement handle or want to adapt one to your own part for 3D printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 12534 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 12534 model
Kategori hakkında

«3D Models of Handles and Grips for 3D Printing»

The range splits roughly into functional groups. Tool and workshop handles cover hex keys, hand drills, scrapers and similar items, while furniture handles include drawer, cupboard and lid versions. Parametric models let you set length, thickness or hole spacing yourself, and long handles appear where a wide panel or crate needs a rail rather than a knob.

When choosing a model, look at the mounting geometry first: hole diameter, screw spacing and how the handle meets the part it attaches to. Check the number of parts and whether assembly is needed, the orientation the author recommends, and whether supports are required. The author's page usually lists material, wall count and infill, and photos of real prints show how the surface and fit turned out.

To widen the search, try synonyms such as grip, knob, pull, bracket or rail, and combine them with the object: hex key, scraper, drawer, crate, lid. Related topics like parametric parts, replacement handles or tool accessories often lead to models that fit the same need. If nothing matches, a parametric handle is usually easier to adjust than to model from scratch.

FAQ

Sıkça sorulan sorular

What should I measure before printing a handle?
Measure the mounting point: hole diameter, distance between holes, and the thickness of the part the handle sits on. Also note the space around it, since a longer handle may collide with a wall or frame.
Do handle models need supports?
It depends on the shape and orientation. Flat-backed handles often print without them, while curved or overhanging grips may need supports on the underside. The author's page usually states what was used.
Which material works for a handle?
It depends on the load. Handles that take force are often printed in a tougher filament, while decorative drawer pulls can use standard PLA. Check the material the author lists and how the part is loaded.
How do I adapt a handle to my own part?
Start from a parametric model and change the hole spacing, length or thickness to match your measurements. Print a small test section first to confirm the fit before printing the full handle.
İlgili
Hobi ve kendin yap

Liktros rail 3D models for inflatable boats

1112 model
Pratik gereçler

3D Models of Lictros Holders for Boats and Rails

459493 model
Pratik gereçler

Lictros Mounts and Snap Clips: 3D Models

200796 model
Taşıtlar

Cup Holders for Cars and Other Mounts: 3D Models

12636 model
Ofis ve çalışma masası

3D Models of Handles and Grips for Printing

241740 model
Taşıtlar

3D Models of Boats and STL Files for 3D Printing

11738 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç