Taşıtlar

ATV Gearbox Handle 3D Models and STL Files

This collection gathers 3D models related to gearbox handles for ATVs and quad bikes, from decorative knobs to grips, adapters and housing parts. It is useful when a stock lever needs a different shape, thread or diameter for 3D printing. Most files are small, so they are convenient test pieces for a 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 7 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 10.10.2026

Koleksiyonu gör Tümünü göster: 48054 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 48054 model
Kategori hakkında

«ATV Gearbox Handle 3D Models and STL Files»

The models fall into a few groups. Some are decorative knobs shaped as sword handles, skulls or animal heads, which replace the top of the lever. Others are functional parts: grips, elongated or offset levers, threaded adapters and boot trim frames, plus housings and reduction gearbox covers. Car-derived knobs also appear, usually with a thread or spline taken from a specific gearbox.

When choosing a model, check the thread size and pitch, the shaft diameter and the overall height, since these decide whether the part fits your lever. Look at the number of parts and whether they are meant to be glued or screwed together, and read the material and settings the author lists. Photos of real prints help judge wall thickness and how the surface will look after printing.

To widen the results, try synonyms: shift knob, gear lever, gearstick, selector handle, quad handle grip, or the Russian terms for the same parts. Related searches include gearbox housing, lever extension, thread adapter and boot frame. Combining a part type with a vehicle class, such as ATV or snowmobile, usually narrows the list faster than a single broad word.

FAQ

Sıkça sorulan sorular

What do I need to measure before printing a gearbox handle?
Measure the thread diameter and pitch, the shaft diameter and the length of the lever you are replacing. Also check the clearance around the lever, because a taller or wider knob can touch the console or the rider's leg.
Which material is used for shift knobs and grips?
Authors usually list the material they printed with, often a rigid filament for knobs and a flexible one for grips. Check that page, since the choice affects how the part feels in the hand and how it wears.
Do these models need supports?
It depends on the shape: threaded studs, overhangs and hollow grips often need them. The author's page usually states the orientation and whether supports were used, so read it before slicing.
Can a car gear knob be used on an ATV lever?
Only if the thread or mounting matches, or if an adapter is printed between them. Compare the thread specification and the shaft shape of both parts first.
İlgili
Taşıtlar

Gear Shift Knobs: 3D Models and STL Files for 3D Printing

49224 model
Taşıtlar

Renault Handle 3D Models: STL Files for Interior Parts

52520 model
Taşıtlar

Renault Gear Shift Knob 3D Models and STL Files

53788 model
Taşıtlar

Iveco Gear Shift Knob 3D Models and STL Files

4908 model
Taşıtlar

Renault Logan Gear Knob STL Models

1183 model
Nesneler

Kia Gear Shift Knob 3D Models and STL Files

12606 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç