Hobi ve kendin yap

Reset Buttons and Mod Parts: 3D Models

This collection gathers 3D models of reset buttons, button caps and small reset hardware used in vape mods, FPV builds and handheld devices. Most files are small parts, so they print quickly on a desktop 3D printer. Browsing them helps you find a shape that matches the opening you already have. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 42 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 10499 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 10499 model
Kategori hakkında

«Reset Buttons and Mod Parts: 3D Models»

The files fall into a few groups. Simple buttons and caps replace or cover an existing switch, while reset systems for mods and FPV builds include brackets, springs and small linkages that move the contact. Protectors for timing devices clip over a button that is already there, and parametric generators let you set the size before exporting a mesh.

Before printing, read the author's page for the shaft diameter, the outer size and the number of separate parts. Check whether the model needs supports, which material and settings the author lists, and whether photos of real prints are shown. Small parts are often worth a test print at the intended scale, since a fraction of a millimetre changes how a cap sits.

If the results look thin, try other wordings: push button, tactile cap, switch cover, squonk contact, 510 reset, FPV reset plate. Related searches such as mod enclosures, timer accessories or parametric parts often lead to the same designers. Combining a reset part with the housing it belongs to usually gives a clearer picture of the fit.

FAQ

Sıkça sorulan sorular

What are reset button models usually printed in?
Authors most often list PLA, PETG, ABS or resin, depending on how much flex or wear resistance the part needs. The material and settings the author used are usually noted on the model page.
Do small button parts need supports?
It depends on the geometry: caps with a flat base often print without them, while overhangs and internal channels may need support. Check the author's notes and any photos of finished prints.
How do I match a button to my device?
Measure the opening and the shaft of the switch you have, then compare those numbers with the dimensions given on the model page. Scaling a file changes the fit, so adjust only if the author says the model tolerates it.
Can I change the size of a parametric button?
Yes, parametric files let you set diameter, height and wall thickness before exporting. Print a small test piece first to confirm the dimensions match your measurement.
İlgili
Moda ve aksesuarlar

VOG, Vogel and Viking Axes: 3D Models to Print

18067 model
Yazıcı parçaları

Reset Parts and Buttons: 3D Models to Print

18207 model
Alet ve ekipman

FPV Drone Parts: 3D Models and STL Files

25469 model
Alet ve ekipman

3D Models for Drone Drop Mechanisms and Mounts

32606 model
Yazıcı parçaları

Reset Button 3D Models and STL Files for Printing

4027 model
Pratik gereçler

Mavic Reset and Accessory 3D Models

12503 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç