Ev ve yaşam

Security Camera Covers: 3D Models and STL Files

This collection gathers STL files for covers that sit over security cameras, webcams and dummy housings. It spans weather hoods, sliding privacy shutters, decorative skins and shells shaped around a single camera family. It is useful when you want to change how a camera looks, block its view or shade it from rain. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 8654 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 8654 model
Kategori hakkında

«Security Camera Covers: 3D Models and STL Files»

Outdoor hoods and rain caps are shaped to overhang the lens and let water run off, while sliding shutters are flat panels that move across a webcam or laptop lens. Decorative skins wrap a camera body in a character or color scheme, and dummy housings imitate a camera where none is installed. Covers drawn around one camera family follow that outline closely, so their mounting points differ from generic clips.

Before printing, read the dimensions and scale on the model page and measure the camera body, because a hood sized for one housing will not fit another. Check how many parts the cover has, whether it clips, screws or slides together, and whether the author notes supports. The material and settings listed by the author, along with photos of real prints, say more about the result than a render does.

If the results look thin, try other terms: camera hood, sun cap, rain shield, lens cover, privacy shutter, webcam clip, dummy camera, camera skin. Related searches include mounts, wall brackets and junction boxes for the same camera families, which often come from the same designers.

FAQ

Sıkça sorulan sorular

What is a security camera cover used for?
It can shade a lens from sun and rain, hide a camera behind a decorative shell, or slide over a webcam to block the view. Some covers are purely visual and imitate a camera that is not installed.
How do I check whether a cover will fit my camera?
Compare the inner dimensions given on the model page with the camera body you have, and look at the mounting method. Covers drawn around a specific camera family usually state which model they were measured from.
Do these covers need supports?
It depends on the shape. Flat sliding panels and simple hoods are often printed without them, while curved shells and overhangs may need them. The author's notes usually describe what was used.
Which material suits an outdoor hood?
Materials that tolerate sunlight and temperature swings are the usual choice for parts kept outside. Check the material and settings on the model page and match them to where the cover will sit.
İlgili
Pratik gereçler

Camera 3D Models: Mounts, Stands and STL Parts

25119 model
Pratik gereçler

STL Files for Phone and Laptop Camera Covers

2107 model
Ev ve yaşam

Pipe Cover 3D Models: Rosettes, Caps and STL Files

4054 model
Pratik gereçler

FPV Camera 3D Models: Mounts, Gimbals, STL Files

61736 model
Ev ve yaşam

3D models of pump covers for PC, pool and fuel pumps

3568 model
Pratik gereçler

3D Models for Car Rear Camera Covers and Shields

3185 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç