Alet ve ekipman

Adjustable Hinge STL Models for 3D Printing

This collection gathers adjustable hinge models made for 3D printing, from furniture and door hinges to enclosure lids and angle stops. It helps you compare how each design sets its position and what hardware it expects. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 2763 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2763 model
Kategori hakkında

«Adjustable Hinge STL Models for 3D Printing»

Adjustable hinges split into a few groups. Door and cabinet versions are built around a pin and screw mounts, while printer and enclosure hinges are sized for panel thickness and lid travel. Angle-stop designs hold a set position, and parametric generators output a hinge at dimensions you enter rather than a fixed shape.

Before printing, read the author's model page. Check the pin diameter and whether it is printed or takes a screw, rod or bolt, the mounting hole spacing, wall thickness around the pin, and whether supports are needed. Look at the material and settings the author lists, and at photos of real prints, since layer orientation at the pin affects how the parts move.

To widen the search, try synonyms such as hinge, scharnier, joint, pivot and angle bracket, or name the part it attaches to, like lid, door, riser or panel. Adding a printer model or a tube diameter narrows results further. Related topics such as brackets, clamps and enclosure parts often turn up hinges that a plain keyword misses.

FAQ

Sıkça sorulan sorular

What does adjustable mean on a printed hinge?
It usually means the hinge can hold more than one position, either through a friction fit, a set of stops, or a screw that sets tension. The model page describes which of these the author used.
Do printed hinges need a metal pin?
Some use a printed pin or an integrated joint, others take a screw, rod or bolt. The author's page lists the hardware, if any, and the diameter it expects.
How do I adapt a hinge to my own part?
Parametric generators let you set dimensions directly. For fixed models, compare the pin diameter and hole spacing with your part first, since scaling a finished model also changes the clearances.
What should I consider when choosing a material?
Hinges take repeated load at the pin, so the material and wall count the author lists are worth following. Layer orientation matters too: parts printed so layers run across the pin tend to split along those layers.
İlgili
Alet ve ekipman

Hinge and joint STL 3D models for printing

60284 model
Ev ve yaşam

Adjustable Cup Holder 3D Models and STL Files

11996 model
Alet ve ekipman

3D Models of Pipe Joints and Fittings for STL Printing

3585 model
Alet ve ekipman

Ball Joint STL Models for 3D Printing

63693 model
Oyuncaklar ve figürler

Articulated Doll 3D Models: Jointed Figures in STL

12512 model
Oyuncaklar ve figürler

3D Models of Doll Joints and STL Parts

12893 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç