Yazıcı parçaları

Gear for BM-1: 3D Models and STL Files

This collection gathers STL files for gears and gear assemblies that can be relevant to BM-1 mechanisms. You will find replacement gears, compound and planetary gearboxes, bevel and worm sets, and parametric gear generators. It helps you compare part geometry before opening an author's model page. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 42 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 6292 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 6292 model
Kategori hakkında

«Gear for BM-1: 3D Models and STL Files»

Gear models in this topic range from single replacement wheels to multi-stage reductions. Compound and planetary designs pack several ratios into a compact housing, while bevel and worm sets change the direction of rotation. Parametric generators let you set tooth count, module, and bore size before exporting an STL.

When choosing a gear, check the module or diametral pitch, tooth count, pressure angle, and bore diameter against the part you need to replace. Look at the author's photos of real prints and read the listed material and settings, because shrinkage and layer height affect how teeth mesh. Also note the number of parts and whether the assembly needs fasteners, axles, or supports during printing.

To narrow the results, try synonyms such as cog, pinion, spur gear, helical gear, and gear wheel, or add the mechanism type you are working on. Related searches include gearbox, reducer, gear train, extruder gear, and motor gear. If you know the reduction ratio or tooth count, include it in the query, but verify the dimensions on the model page rather than relying on the title alone.

FAQ

Sıkça sorulan sorular

How do I identify the gear I need for a BM-1 mechanism?
Measure the original gear's outer diameter, tooth count, bore, and thickness, and compare them with the model's listed dimensions. The module or pitch and pressure angle also matter for correct meshing.
Can I print a gear in resin instead of filament?
Both materials appear in gear projects, but resin gears can be brittle under load while filament gears may wear differently. Check the author's material notes and your printer's capabilities.
Can I scale a gear model to fit?
Scaling changes tooth size and center distance, so it usually affects how gears mesh. It is better to find a model with the correct module and tooth count or adjust the source file parametrically.
What should I check before printing a gearbox assembly?
Review the part count, axle sizes, clearances, and whether the design expects supports or post-processing. Test-fit the gears after printing and adjust the print settings if the teeth bind.
İlgili
Alet ve ekipman

3D Models of Gears: Fidget, Planetary and Mechanical STL

144660 model
Oyuncaklar ve figürler

Lego Gear STL Files for 3D Printing

60605 model
Oyuncaklar ve figürler

Anti-Stress Gear 3D Models: STL Fidgets to Print

45416 model
Alet ve ekipman

Gear 3D Models and STL Files by Tooth Count

73246 model
Nesneler

Double Gear 3D Models: STL Files for Printing

4272 model
Alet ve ekipman

Gear 2108 STL Models for 3D Printing

34288 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç