Nesneler

Side Pocket Lock 3D Models and STL Files

This collection gathers STL files for side pocket locks and related parts, from folding knife lock components to side-mounted holders and adapters. It helps you compare how different designs handle pockets, mounting points and locking mechanisms before you open a listing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 11899 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 11899 model
Kategori hakkında

«Side Pocket Lock 3D Models and STL Files»

Folding knife lock designs often center on the pivot, liner or frame, while side-mounted holders focus on clips, brackets and mounting points. Pocket inserts and side panels tend to be shaped around a specific enclosure, table or cart, so their outlines vary more. Lock mechanism models can be small assemblies with pins, trays or housings, and they usually need more attention to tolerances.

Before printing, read the model page for dimensions, scale, part count and assembly order. Check whether the author lists supports, layer height, material or orientation, and look at photos of real prints to see how the parts meet. For moving lock parts, clearances and pin holes matter more than decorative details.

If a search is too narrow, try synonyms such as side lock, pocket clip, liner lock, frame lock, side holder, adapter or pocket insert. Pairing a mechanism with an object type, like knife, enclosure, table or cart, can bring up related designs. You can also search for replacement parts, mounts or trays when the main term gives few results.

FAQ

Sıkça sorulan sorular

What does side pocket lock mean in 3D model collections?
It can describe a lock built into a side pocket, a side-mounted locking holder, or a folding knife lock positioned beside the handle. Because the phrase is broad, the model page is the place to confirm the exact mechanism.
What should you check before printing a side pocket lock model?
Look at the listed dimensions, scale, part count and assembly steps. Check whether the author mentions supports, material and settings, and review photos of actual prints.
How can you refine a search for side pocket lock models?
Try related terms such as side lock, pocket clip, liner lock, frame lock, side holder, adapter and pocket insert. Adding an object type, such as knife, enclosure or cart, can narrow the results.
Do side pocket lock models need special printing settings?
Settings depend on the design and the material listed by the author. Small lock parts may call for finer layer heights and careful orientation, while larger holders and panels may use standard settings.
İlgili
Pratik gereçler

Side Pocket Clip 3D Models and STL Files

11392 model
Nesneler

Pocket Lid Lock 3D Models and STL Files

7387 model
Pratik gereçler

Pocket-Sized 3D Models and STL Files to Print

59141 model
Nesneler

Box With Sides: 3D Models for Storage and Hinges

13171 model
Ev ve yaşam

3D Models with Locks: Clips, Boxes, Latches

136033 model
Nesneler

3D Models for Case Locks and Locking Mechanisms

14669 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç