Ev ve yaşam

IKEA Skadis 3D Models: Holders, Racks, Organizers

This collection gathers STL files for parts that attach to IKEA Skadis pegboards: holders for sockets and bits, mounts for hand tools, bins, drawer modules and small racks. The models differ mostly in what they grip and how they hook onto the board, so the same 3D printing setup can cover several workshop or desk needs. It helps when you want a specific tool or object to sit at a fixed place on the wall instead of in a drawer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 12724 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 12724 model
Kategori hakkında

«IKEA Skadis 3D Models: Holders, Racks, Organizers»

The most common group holds small metal items: sockets in several drive sizes, hex bits, screwdrivers and pliers. These parts usually combine a hook that fits the pegboard slot with a shaped cradle or clip, and some are split into a base plus an insert so one base can take different tools. Larger pieces move toward storage rather than single-tool holding: open bins, lidded boxes, drawer modules and panel extensions that widen the usable area of the board. A third group mounts devices and accessories, such as chargers, controllers or headsets, where the shape follows the device rather than a tool.

Before printing, open the author's page and read the listed dimensions: pegboard spacing is fixed, but the depth of a hook, the wall clearance behind the board and the thickness of the clip all affect whether a part sits flat. Check how many separate pieces a model has and whether they are joined with screws, glue or a snap fit, since that decides how much assembly you take on. Look at the material and settings the author lists, and at photos of real prints, to judge how much load a holder is meant to carry. Long or heavy tools often need a wider base or a second hook, and a model that is fine for a bit holder may flex under a full socket rail.

Search results for this topic mix several naming habits, so try alternatives: pegboard, peg board, wall organizer, tool holder, and the tool type itself, such as socket rail, bit holder or plier rack. Adding a size or drive standard narrows things quickly, for example 1/4, 3/8 or 1/2, or a dowel diameter. Related directions worth checking are drawer inserts, desk cable clips and modular panel systems, which often reuse the same hook geometry. If a search returns too much, combine the board name with one object type rather than browsing the whole category.

FAQ

Sıkça sorulan sorular

Do Skadis pegboard holders need supports when printed?
It depends on the hook geometry. Many designs are drawn so the hook prints as a bridge or with a small overhang, while others include a separate hook piece. The author's page usually states whether supports are needed and where.
What should I check before printing a holder for a specific tool?
Compare the tool's real dimensions with the numbers on the model page, especially width and thickness at the point where it is gripped. Also check the depth of the hook and the clearance behind the board, since a thick hook can stop the panel from sitting flush.
Can one holder fit several pegboard sizes?
Slot spacing is standardized on Skadis boards, so the hook usually fits, but the surrounding shape is made for one object. Models that split into a base and an interchangeable insert are the ones that cover several tools.
Which search terms find more of these models?
Try pegboard, wall organizer, tool mount and bin alongside the board name, then add the object type or size. Terms like socket rail, bit holder, dowel rack or drawer module return different sets of results.
İlgili
Ev ve yaşam

SKADIS 3D Models: Pegboard Accessories and Organizers

48008 model
Ev ve yaşam

Skadis Holder 3D Models: STL Files for Pegboard Storage

580614 model
Ev ve yaşam

Skadis Shelf 3D Models and STL Files

3399 model
Ev ve yaşam

Skadis Mask and Pegboard 3D Models in STL

3120 model
Ev ve yaşam

Skadis Pegboard 3D Models and STL Accessories

72077 model
Ev ve yaşam

Skadis Mug and Cup Holders: 3D Models and STL

2281 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç