Alet ve ekipman

3D Models of Washing Nozzles and Spray Heads

The collection gathers STL files for nozzles that direct water, from pressure-washer jets to garden hose spray heads and shower fittings. It is useful when you need a replacement part or a custom spray pattern for 3D printing. Entries range from simple single-piece tips to multi-part assemblies with threads and seals. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 4320 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 4320 model
Kategori hakkında

«3D Models of Washing Nozzles and Spray Heads»

Pressure-washer and car-wash nozzles usually concentrate the stream into a narrow, forceful jet, while garden hose and lawn models spread water across a wider area. Shower and pet-washing heads sit between the two, often adding a ring of holes or an adjustable pattern. Some entries are complete nozzles, others are adapters, nuts or inserts that join an existing hose, wand or pipe.

On the author's model page, look at the thread or connector size and the orifice diameter, since these decide whether the part fits your hose or wand. Check how many parts the model has, whether supports are needed and how it is oriented for printing. Parts that carry water benefit from a material that resists moisture and sunlight, and from enough wall thickness around the threads; photos of real prints show how the surfaces came out.

Searching with synonyms helps: spray head, jet tip, hose adapter, sprayer insert or water nozzle lead to different results. Related topics such as pressure washer accessories, garden watering, drain cleaning or shower fittings bring up more files. Adding the machine or tool you own, or the pipe and hose size, narrows the list further.

FAQ

Sıkça sorulan sorular

What should I measure before printing a washing nozzle?
The thread or connector size and the orifice diameter matter most, because they decide whether the nozzle attaches to your hose, wand or pipe. The outer diameter of the part it joins is also worth noting.
Can a printed nozzle be used on a pressure washer?
It depends on the material, wall thickness and layer orientation, since printed parts are weaker along layer lines. Many printed nozzles are used for low-pressure watering, showers or drains rather than high-pressure machines.
Do these models need supports?
Many nozzles are drawn to print as one piece without supports, but models with internal channels or overhanging threads may need them. The author's page usually states the orientation and support settings.
How do I keep the connection from leaking?
O-rings, rubber washers or a little sealant at the joint help. A smooth inner bore and a well-fitting thread also reduce leaks.
İlgili
Yazıcı parçaları

Nozzle Box STL Models for 3D Printing

206302 model
Yazıcı parçaları

Laser Nozzle and Z-Axis STL Models for 3D Printing

11795 model
CNC ve freze

Laser Nozzle STL Models for Air Assist

48609 model
CNC ve freze

Laser Air Assist Nozzles: 3D Models and STL Files

5176 model
Mutfak

3D Models for Kitchen Sink Accessories and Produce Rinsers

36450 model
Evcil hayvanlar

3D Models for Pet Paw Washing and Cleaning

7763 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç