Nesneler

Car Speaker Pods and Mounts: 3D Models and STL Files

This collection gathers STL files for mounting speakers in a car: angled pods, tweeter holders, boxes and grills. It is useful when a factory opening does not match the driver you have and you would rather print an adapter than cut the door card. Most of these parts are small enough for a desktop 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 12194 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 12194 model
Kategori hakkında

«Car Speaker Pods and Mounts: 3D Models and STL Files»

The models fall into a few groups. Angled pods and tilt adapters hold a driver at a set angle so it points toward the listening position, and they usually come in several sizes. Tweeter mounts are shaped for a door, mirror triangle or dashboard spot, while boxes and enclosures give a driver its own volume. Grills, rings and trim parts cover the opening or finish the edge of a panel.

Before printing, compare the model's dimensions with your driver: cutout diameter, mounting hole spacing, depth behind the panel and the angle of the surface it sits on. Look at how many parts the model has, whether they are meant to be glued or screwed together, and whether the author mentions supports. The material and settings listed on the model page matter for parts that sit in a hot cabin, and photos of real prints show how the piece actually fits.

If the first search is thin, try other words for the same part: speaker adapter, pod, bracket, mount, spacer or trim ring, plus the position such as door, dashboard, parcel shelf or mirror triangle. Related topics are worth a look too, including amplifier racks, dash panels and interior trim clips. Changing the driver size in the query, or searching by the shape of the opening rather than the car, often brings up more results.

FAQ

Sıkça sorulan sorular

What should I measure before printing a car speaker mount?
Measure the cutout diameter, the mounting hole spacing and the depth available behind the panel. Also note the angle of the surface the mount will sit on, since a flat base will not fit a curved door card.
Why are speaker pods angled?
A tilt aims the driver toward the listener instead of into the footwell or the door. The angle is usually fixed in the model, so pick one that matches the position of the speaker in your car.
Which material is used for parts inside a car?
Parts in a cabin see heat and sunlight, so many people print them in ABS, ASA or PETG rather than plain PLA. The author's page often lists a material and settings that worked for that model.
Can a model be adapted to a different speaker size?
Sometimes. Parametric files let you change the diameter and hole spacing, while fixed models need scaling or editing, which also changes the wall thickness and the fit of the parts.
İlgili
Taşıtlar

Araba hoparlörü için 3D model ve STL dosyaları

5562 model
Elektronik

3D Models for Tiguan Speaker Pods and Stands

2828 model
Nesneler

3D Model: Duvar ve Masa Tutucu Braketleri

776103 model
Taşıtlar

3D Models for Car Interiors and Accessories

388810 model
Yazıcı parçaları

3D Filament Makara Tutucu ve Stand Modelleri

3701 model
Ofis ve çalışma masası

3D model kulaklık standı için STL dosyaları

7583 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç