Alet ve ekipman

120 mm Fan Stand and Mount STL Models for 3D Printing

This collection gathers STL files for holders that keep a 120 mm fan upright on a desk, inside a case or against a wall. The models range from single-fan stands with an adjustable angle to frames that carry several fans at once. It is a practical starting point if you use a 3D printer to build your own cooling setup. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 2824 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2824 model
Kategori hakkında

«120 mm Fan Stand and Mount STL Models for 3D Printing»

The most common group is the desk stand: a base with a cradle or a clip that holds one 120 mm fan and lets you tilt it toward you. A second group adapts the same fan to an existing opening, such as a drive bay or a case panel, and often includes screw holes copied from the fan frame. Larger builds combine several fans in one frame or shelf, which changes the footprint and the amount of material needed.

When you open a model page, look at the stated fan size and the mounting hole spacing, since 120 mm fans share a nominal size but differ in frame thickness and corner details. Check how many separate parts the author lists, whether they are joined with screws or printed pins, and whether the geometry needs supports. The author's material and settings notes, plus photos of real prints, tell you more than the render.

If the results feel narrow, try other wording: fan bracket, fan holder, fan shroud, blower mount or cooling stand. Related searches such as 140 mm adapters, wall brackets, or frames for several fans lead to designs that follow the same logic with different dimensions. Adding the intended use, for example desk, case or workshop, also shifts what the search returns.

FAQ

Sıkça sorulan sorular

What should I check before printing a 120 mm fan stand?
Confirm the fan size and hole spacing given on the model page, then compare them with the fan you have. Also read the part count and the assembly notes, because some stands are printed as one piece and others as several joined parts.
Do these stands need supports?
It depends on the shape: flat bases and simple cradles often print without them, while overhanging arms or enclosed rings may need them. The author usually states this on the model page, so check before slicing.
Can the angle of a printed fan stand be changed?
Some designs use a hinge, a ratchet or a set of notched positions, and others are fixed at one angle. The model description or the part list shows which approach was used.
Which material is used for fan mounts?
Authors typically list the filament they printed with and the settings they used. Rigid filaments are common for frames and bases, while parts that flex or clip may be printed in a softer material.
İlgili
Nesneler

120 mm fan standı 3D model ve STL dosyaları

7101 model
Yazıcı parçaları

3D yazıcı için fan ve PC kasa fanı modelleri

357115 model
Nesneler

120 mm fan ızgarası ve filtre 3D model

1934 model
Taşıtlar

Toyota Corolla E120 3D model ve STL dosyaları

8993 model
Taşıtlar

Toyota Prado 120 için 3D model ve STL dosyaları

8206 model
Nesneler

3D Model: Duvar ve Masa Tutucu Braketleri

776103 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç