Alet ve ekipman

Drill Guides and Dust Collectors: STL Models

This collection gathers 3D models that support drilling work: guides and jigs, dust catchers, bit sharpeners and small drill stands. Most of them are printed on a home 3D printer and used at the workbench. The set is useful when you want to repeat the same hole position or keep chips away from the workpiece. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 52585 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 52585 model
Kategori hakkında

«Drill Guides and Dust Collectors: STL Models»

The models fall into a few practical groups. Guides and jigs set the angle or spacing of a hole, and some are made for panel materials where edge drilling needs a fixed offset. Dust collectors clip around the drill or the bit and hold the debris that would otherwise spread over the bench. Sharpeners restore the cutting edge of a bit, while mini presses and stands turn a hand drill into something closer to a bench tool.

When choosing a model, read the author's page rather than the picture alone. Check the stated size and scale, the diameter of the drill or bit it accepts, how many parts have to be printed and joined, and whether the geometry needs supports. The material and layer settings the author lists matter for parts that take load or rub against metal, and photos of real prints show how the assembled piece behaves.

Search results widen if you try other wording for the same idea: jig, template, fixture, bushing block or hole spacing for guides; chip catcher or swarf tray for dust parts; bit grinder or edge restorer for sharpening; bench stand or pillar stand for presses. Related topics such as woodworking, workshop storage and printer-made tooling often lead to further models of the same kind.

FAQ

Sıkça sorulan sorular

What is a drill guide used for in 3D printing?
It is a printed part that holds a drill bit or a hand drill at a set angle or position, so repeated holes line up. Many designs also include a bushing hole or a slot that follows the edge of a panel.
Which material works for printed drill jigs?
Authors usually list the material and settings they used, and these vary by design. Parts that touch a spinning bit wear faster, so check the wall thickness and infill the author recommends before printing.
How do printed dust collectors attach to a drill?
Most designs either clip around the drill body or sit against the surface being drilled, with a cavity that traps chips. The model page should state the drill diameter or the bit size the opening fits.
Can a printed stand hold a hand drill steady?
A small stand or mini press can hold a hobby or PCB drill for vertical work. Check the stated clamp size and the parts list, since larger drills need more material and a wider base.
İlgili
Alet ve ekipman

Drill Bit Stands: 3D Models and STL Files

515320 model
Alet ve ekipman

Drill Holder STL Models for 3D Printing

553569 model
Alet ve ekipman

Drill Organizer 3D Models for Printing

200082 model
Alet ve ekipman

3D Models for Drill Bit Sets and Storage

66308 model
Alet ve ekipman

3D Models for Drill Storage and Bit Organizers

4346 model
Alet ve ekipman

Drill Sharpening Jigs and Guides for 3D Printing

16568 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç