Nesneler

Tent Magnet 3D Models and STL Files

This collection gathers 3D models that connect magnets with tents, canopies and tarps. You will find hangers, loops, sign holders, miniature tent structures and magnet test coupons. It helps you find parts for 3D printing that hold fabric, signs or gear in place. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 3238 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 3238 model
Kategori hakkında

«Tent Magnet 3D Models and STL Files»

Magnetic hangers and loops for tents and tarps usually consist of a printed body that holds a magnet, while canopy sign holders combine a magnetic base with a clip or arm. Miniature tent structures use magnets as fasteners between printed panels, and test coupons focus on magnet fit rather than outdoor use. These categories differ in load, orientation and whether the magnet is embedded or attached after printing.

On the author's model page, check the size and scale, the number of parts, and whether supports are needed. Look at the material and settings the author lists, since magnet pockets may require pauses or specific tolerances. Photos of real prints can show how the magnet sits and whether the model holds its shape.

To narrow the results, try synonyms such as magnetic hook, tarp clip, canopy sign arm or magnet pocket. Related topics include camping gear holders, controller mounts and magnet test blocks. Combining a use case with a magnet size or a tent type often brings more specific models.

FAQ

Sıkça sorulan sorular

What magnets are used in tent magnet models?
Most models are designed around common disc or block magnets, but the required size and shape are listed by the author. Check the model page for the exact magnet dimensions and how it is retained.
Do these models need supports?
It depends on the geometry; some have overhangs or internal pockets. The author's page usually states whether supports are needed and where to place them.
Can I scale a tent magnet model?
Scaling changes the magnet pocket, so a scaled print may not fit the intended magnet. If you resize, adjust the pocket dimensions or use a different magnet size.
How do I search for similar models?
Try terms like magnetic hanger, tarp loop, canopy sign holder or magnet test coupon. Adding the tent type or the gear you want to hold can refine the list.
İlgili
Pratik gereçler

Magnet 3D Models: STL for Pens, Holders and Toys

26403 model
Genel arama

3D Models with Permanent Magnets to Print

3507 model
Hobi ve kendin yap

3D Models for Tent Connectors and Pole Joints

10778 model
Nesneler

Dog Helmet 3D Models and STL Files for Cosplay

89528 model
Nesneler

Piston 3D Models: STL Engines, Fidgets, Trophies

7496 model
Nesneler

Diamond and Rhombus 3D Models for Printing

11038 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç