Taşıtlar

Tsurikawa 3D Models: Straps, Locks and Charms

This collection covers tsurikawa-style 3D models: train hand straps, rings, check-engine charms and the lock parts that hold them together. Files appear in several scales, from keyring size to a full hand-sized loop, and many double as mirror hangers or interior details. If you are searching for STL files around JDM strap culture, this is a good place to start. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 45 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 1688 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 1688 model
Kategori hakkında

«Tsurikawa 3D Models: Straps, Locks and Charms»

The strap is the core shape: a ring, often round, with a loop or a hole for a cord. Alongside it you will find check-engine and dashboard-light charms, strap locks split into top and bottom halves, some with a snap button, and decorative takes such as ribbon, clover or diamond outlines. Sizes differ a lot, so a charm can be small enough for a keyring while a strap is closer to a hand-sized loop.

Before printing, open the author's model page and read the dimensions: ring diameter, strap thickness and the size of the cord hole decide whether the piece fits your keyring or mirror. Check how many parts a lock or ring consists of, whether supports are needed, and which material and settings the author lists. Photos of real prints are the quickest way to see how a snap button or a ring edge comes out.

Search terms help narrow the results. Try tsurikawa, tsuri-kawa, train hand strap, JDM strap or drift charm for the main shape, and check engine light keychain, keyring or mirror hanger for the charm side. Related words such as ring, strap lock, snap button, interior accessory or keychain hardware bring up the smaller parts.

FAQ

Sıkça sorulan sorular

What is a tsurikawa?
It is a hand strap from Japanese train carriages that became a hanging accessory in car culture. In 3D printing it usually appears as a ring with a loop, sometimes paired with a charm or a lock.
Which material works for a tsurikawa strap?
Authors usually list a material on the model page. Rigid filaments hold the ring shape, while flexible ones let a strap bend, so read the notes before choosing.
Do these models need supports?
It depends on the file. Rings and locks are often split so they print flat, while charms with overhangs may need supports. The author's page usually states orientation and support needs.
How do I scale a tsurikawa for a keychain?
Check the stated dimensions and scale the model so the ring and hole match your cord or keyring. Very small scales can make thin loops weak, so print one piece first.
İlgili
Taşıtlar

Tsurikawa 3D Models and STL Files for Car Interiors

91 model
Karakterler

Tsurikawa Cat 3D Models and STL Keychains

2254 model
Evcil hayvanlar

Pitbull and Tsurikawa 3D Models and STL Files

2184 model
Taşıtlar

3D Models for Number Plate Frame Mounts and Brackets

11634 model
Taşıtlar

Honda Prelude BB6 3D Models: STL Files to Print

2244 model
Taşıtlar

3D Models of Hydraulic Car Lifts and Garage Dioramas

1738 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç