Alet ve ekipman

3D Models for Rod Clamps and Bushings

This collection gathers STL files for rod clamps, bushings, spacers, and frame mounts. It helps when you need to replace a worn part or adapt a rod to a different holder. Check dimensions and assembly details before printing on your 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 45 model 7 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 27233 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 27233 model
Kategori hakkında

«3D Models for Rod Clamps and Bushings»

Models range from simple split clamps and threaded bushings to parametric spacers and frame brackets. Some are single-piece parts, while others combine a clamp, insert, or adapter. Parametric versions let you adjust bore diameter, wall thickness, or mounting hole spacing.

On the author's page, check the inner and outer diameter, rod size, and whether the part is meant to slide, grip, or lock. Look at the number of parts and any assembly steps, plus the material and print settings the author lists. Photos of real prints can show how the clamp closes and whether supports are needed.

To narrow the results, try synonyms such as bushing, spacer, sleeve, collar, clamp, bracket, and holder. Related terms like rod connector, frame mount, pipe clamp, or parametric adapter can surface different designs. Combining a use case with a dimension, for example a rod diameter or pipe size, helps filter the list.

FAQ

Sıkça sorulan sorular

What is the difference between a bushing and a rod clamp?
A bushing usually fits around a shaft or rod to reduce play or set spacing, while a clamp grips or locks the rod in place. Some models combine both functions in one part.
How do I choose the right inner diameter?
Measure the rod or shaft with calipers and compare it to the bore listed on the model page. Account for the material and printer tolerances, since a printed bore may come out slightly different.
Do these models need supports?
It depends on the shape and orientation. Check the author's photos and notes, and look for overhangs, threads, or internal bores that may require supports.
Can I scale a bushing or clamp?
Scaling changes both the outer size and the bore, so it may no longer fit the rod or housing. If the model is parametric, adjust the relevant dimensions instead of scaling the whole part.
İlgili
Taşıtlar

Hood Latch Sleeves and Locking Clips: 3D Models

10577 model
Taşıtlar

Car Clip Fastener 3D Models and STL Files

2423 model
Taşıtlar

Caravelle T6 Rod Retainer: 3D Models and STL Files

2397 model
Nesneler

Bushing STL Models for Repairs and Printer Parts

17231 model
Alet ve ekipman

Rod Clamp STL Models for 3D Printing

5037 model
Taşıtlar

8 mm Auto Retainer Clips: 3D Models and STL Files

414376 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç