Taşıtlar

Trunk Plug STL Models for Car Bodies and Cargo Vehicles

This collection gathers STL files for trunk plugs, body caps and stoppers used in cars, cargo vehicles and roof boxes. You will find model-specific caps as well as parametric plug generators that can be resized. It helps when a plastic plug is missing or a hole in a panel needs closing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 50294 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 50294 model
Kategori hakkında

«Trunk Plug STL Models for Car Bodies and Cargo Vehicles»

The models fall into a few groups. There are floor and body plugs that close round or oval openings in a trunk pan, model-specific caps shaped after a particular car, and larger stoppers for cargo vehicles, scooters and roof boxes. A separate group covers print-in-place parts such as dividers, clips and rail plugs, and another covers parametric generators that build a plug from the dimensions you enter.

When choosing, start with the hole: measure its diameter and shape, and the thickness of the panel it sits in, then compare these with the dimensions on the model page. Check how the part is held in place — a press fit, a clip, a screw or a hook — and how many separate parts the author lists. Look at whether supports are needed for hooks and clips, which material and settings the author mentions, and photos of real prints rather than only renders.

If the results are thin, try other words for the same part: plug, cap, grommet, bung, stopper or cover, and add the panel it belongs to, such as trunk floor, boot or body panel. Terms like print in place, parametric or generator lead to models you can adapt to your own measurements. Related searches include interior trim clips, roof box hardware and trailer socket holders, which use similar mounting ideas.

FAQ

Sıkça sorulan sorular

What is a trunk plug used for?
It closes an opening in the trunk floor or a body panel, such as a drainage hole or a mounting point left after trim is removed. Some versions also hold a hook, a rail or a cable.
How do I pick the right size?
Measure the opening diameter and the panel thickness, then compare them with the dimensions given on the model page. Parametric models let you enter your own values instead of scaling a fixed shape.
Do these parts need supports?
Flat caps often print lying down with little overhang, while parts with hooks, clips or deep recesses may need supports. The author's notes and photos usually show how the model was oriented.
Which material is used for car interior parts?
Authors commonly list PETG, ABS or ASA for parts that sit in a car and see heat, and PLA for dry, cool places. Check the material and settings on the model page before printing.
İlgili
Taşıtlar

Kia Rio Trunk Plug 3D Models and STL Files

3665 model
Taşıtlar

Trunk Hinge Plug STL Models for 3D Printing

62513 model
Taşıtlar

3D Models for Trunk Rail Plugs and STL Caps

66906 model
Taşıtlar

Kia Trunk Hinge Plug 3D Models and STL Files

64947 model
Taşıtlar

Trunk Hinge Plugs: 3D Models and STL Files

2791 model
Taşıtlar

3D Models for Trunk Organizers: STL Files to Print

186007 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç