Pratik gereçler

3D Models for Chargers, Stands and Cable Holders

This collection gathers 3D models built around charging: stands and docks for phones and watches, clips that keep cables in place, and holders for loose battery cells. Most of them are small parts that a 3D printer can handle in one session, which makes them a practical starting point if you want your desk or workshop organized. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 24112 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 24112 model
Kategori hakkında

«3D Models for Chargers, Stands and Cable Holders»

The models fall into a few groups. Phone and MagSafe stands hold a handset at a readable angle, sometimes with a separate spot for a watch. Cable organizers range from simple clips to full routing channels. Battery holders keep cylindrical cells in place, while adapter caddies and small tools deal with plugs, ports and power bricks.

Before printing, open the author's model page and read the listed dimensions: the opening for the connector, the width of the cable channel, the angle of the stand and whether magnets or screws are required. Check the number of parts and how they join, whether supports are needed, and which material and settings the author used. Photos of real prints show how the part sits on a desk and how much clearance it leaves.

If the first search gives few results, try synonyms such as stand, dock, cradle, holder, mount, clip or organizer, and combine them with a device type or connector name. Related topics are worth a look too: desk organization, cable management, battery storage and watch accessories often contain parts that serve the same purpose under a different title.

FAQ

Sıkça sorulan sorular

What should I check before printing a charging stand?
Look at the listed dimensions, the connector opening and the angle of the stand, then compare them with your own device and cable. The model page usually states whether supports, magnets or extra hardware are needed.
Which material is used for these parts?
Authors usually list the filament they printed with, often a common rigid plastic for stands and a more flexible one for clips. Check the settings they mention, since thin walls and small clips behave differently from solid bases.
How do I find a holder for a specific phone or watch?
Search by device type plus a word like stand, dock or cradle, and read the dimensions on the model page. If nothing matches exactly, a generic stand with an adjustable or open front is easier to adapt.
Can a printed holder fit a thick cable?
It depends on the channel width given in the model description. Measure the connector and the cable jacket first, and if the gap is too tight, look for a version with a wider opening or scale the model slightly.
İlgili
Pratik gereçler

Redmi Watch Stands: 3D Models and STL Files

527717 model
Pratik gereçler

Flydigi Apex 5 Stick Parts: 3D Models and STL Files

114611 model
Pratik gereçler

3D Models for E-Scooter Handlebar Risers and Mounts

4022 model
Pratik gereçler

Xbox Series X Body 3D Models and STL Files

144026 model
Pratik gereçler

PS4 Controller Stands and Mounts: 3D Models to Print

294162 model
Pratik gereçler

3D Models of Lens Caps, Holders and Adapters

14672 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç