Ev ve yaşam

3D Models for Mirror Holders and Mounts (STL)

This collection gathers 3D models that hold, clip or angle a mirror — from wall brackets and adjustable arms to small clips and desk organizers. The files are meant for 3D printing, so you can adapt the size, screw holes and tilt to the mirror you already have. It helps when an off-the-shelf bracket does not match the thickness or the mounting surface. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 545294 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 545294 model
Kategori hakkında

«3D Models for Mirror Holders and Mounts (STL)»

The models fall into a few groups. Wall and furniture mounts fix a mirror flat against a surface, while adjustable holders use a joint or a slotted bolt so the angle can be set after assembly. Small clips and brackets are the simplest parts and often exist to grip a thin mirror or a panel edge. Espresso shot mirrors and desk organizers combine a mirror with a stand or a tray, so they carry more parts and a larger footprint.

Before printing, read the author's page for the mirror thickness the part was drawn around, the screw or bolt size, and the number of separate pieces. Check whether the model needs supports, which way it should be oriented on the bed, and what material and settings the author lists. Photos of real prints show how the joint or the clip behaves once assembled, which matters more here than the render.

If you do not find the shape you need, try related wording: mirror bracket, mirror clip, mirror mount, adjustable arm, blind spot mirror, shot mirror, or desk organizer. Searching by the surface you attach to — wall, cabinet, monitor, machine housing — or by the object the mirror belongs to often turns up more results than the word mirror alone.

FAQ

Sıkça sorulan sorular

What should I measure before printing a mirror holder?
The mirror thickness, the width of the edge the holder grips, and the position of any screw holes or mounting surface. A holder drawn for a thin panel will not close around a thicker one.
Do these models need supports?
It depends on the shape. Brackets with overhangs or a closed clamp often do, while flat plates and simple clips usually print without them. The author's page normally states the orientation and whether supports were used.
Which material works for a mirror holder?
Rigid filaments such as PLA or PETG are common for indoor brackets; parts exposed to heat or sunlight are often printed in a material with higher temperature resistance. Check what the author lists and what your mounting location allows.
Can I resize a holder to fit my mirror?
Scaling works for simple clips, but screw holes, bolt slots and joint clearances change with scale. It is often easier to adjust those dimensions in the source file than to scale the whole part.
İlgili
Ev ve yaşam

3D Models of Mirrors for 3D Printing

49977 model
Nesneler

3D Models for Car Mirrors and Mirror Decor

210183 model
Minyatürler ve savaş oyunları

3D Models of Doll Mirrors and Dressing Tables

11321 model
Nesneler

Bicycle Mirror 3D Models and STL Files

2815 model
Oyuncaklar ve figürler

Doll Mirror 3D Models: STL Files for Miniatures

12414 model
Taşıtlar

BMW E34 Mirror Parts: 3D Models and STL Files

2524 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç