交通工具

Air Intake 3D Models and STL Files to Print

This collection gathers STL files for air intake parts: adapters and housings for cars, vehicle-specific ducts and snorkels, scoops and vents, plus air-powered spinners and small launchers. It helps when you need a replacement or a custom piece for a 3D printing project and want to compare several approaches in one place. Every listing leads to the author's page, where the model itself is described. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自5个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月11日

查看合集 查看全部37470个模型 →
合集

从这里开始

合集中的全部模型

查看全部37470个模型
关于此分类

«Air Intake 3D Models and STL Files to Print»

The models fall into a few groups. Car intake parts include adapters that join a filter to a factory pipe, complete intake housings, and ducts or snorkels shaped around a particular engine bay. Scoops, vents and covers are flatter pieces that guide air toward a window or an opening, while spinners, turbines and mini cannons use airflow for motion rather than for an engine.

Before printing, open the model page and read the stated size and scale, since some files are drawn for a full-size car and others for an RC body. Check how many parts the model has and whether they are meant to be glued or fastened, and look at the notes on supports, orientation and material. Photos of finished prints show how a piece sits in place better than a render does.

If the results are too narrow, try related terms: cold air intake, intake adapter, air scoop, snorkel, vent, filter housing, or the engine and model year you are working with. Air-powered toys appear under spinner, turbine, fidget or air cannon. Adding a material or a printer type to the query can narrow the list further.

FAQ

常见问题

What is the difference between a cold air intake and an air scoop?
A cold air intake is a ducting and filter assembly that replaces or extends the factory intake path, while a scoop or vent is usually a separate piece that directs outside air toward an opening. Some builds combine both.
Can these intake parts be printed in PLA?
PLA is common for mock-ups and cool-side parts, but components near an engine bay see heat, so many builders choose PETG, ABS or a nylon blend. The author's page usually states the material the model was designed around.
How do I judge whether a model will fit my car?
Fit depends on the engine bay, the pipe diameter and the mounting points, so compare the dimensions on the model page with measurements taken from your own vehicle. Files made for one generation or trim often need scaling or trimming for another.
Do air-powered spinners and turbines need special settings?
They often have parts that move without assembly, so clearance between the rotor and the housing matters. A smaller layer height and a well-calibrated printer help the parts turn without binding.
相关
交通工具

Subaru Air Intake 3D Models and STL Files

34417个模型
交通工具

Air Intake Moto 3D Models and STL Files

10008个模型
交通工具

3D Models for Air Intake Parts and Adapters

6104个模型
交通工具

3D Models for Air Intakes: Scooter, Car and Fan Parts

33397个模型
交通工具

Window Air Intake and Vent STL Models

2515个模型
交通工具

Window Air Intake Adapters: 3D Models and STL Files

2593个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录