爱好与创客

Apex 5 FPV Frame Parts: 3D Printed STL Models

This collection gathers STL files for parts that go with Apex 5-inch FPV frames: camera mounts, arm and motor guards, bumpers, antenna holders and small covers for electronics. It is useful when you already fly such a frame and want to replace a broken part or adapt the build to a different camera. Each entry is a 3D printing file, so the result depends on the material and settings you choose. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自5个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月14日

查看合集 查看全部90596个模型 →
合集

从这里开始

合集中的全部模型

查看全部90596个模型
关于此分类

«Apex 5 FPV Frame Parts: 3D Printed STL Models»

The models fall into a few groups. Mounts hold a camera unit or an air unit on the frame, and they differ in the camera they are shaped around, the screw pattern and whether they sit at the front or on top. Guards and protectors cover arms, motors or the flight controller and stack, and they vary in thickness and in how they attach. Smaller items include antenna holders, power connector brackets and bumpers that sit around the camera.

Before printing, open the author's page and read the listed dimensions: hole spacing, plate thickness and overall height decide whether a part lines up with your frame. Check how many pieces the model has and how they join, whether the author reports that supports are needed, and which material and settings are given. Photos of real prints are the most useful reference for judging wall thickness and flex.

If a search returns little, try related wording: quadcopter, FPV frame, drone arm, camera mount, motor guard, antenna holder, TPU part. Searching by the camera or air unit you use, or by the frame size rather than the frame name, often brings up more results. You can also browse neighbouring topics such as 5-inch frame accessories, action camera mounts or flight controller covers.

FAQ

常见问题

Which parts of an Apex 5 frame are usually 3D printed?
Most often camera and air-unit mounts, arm and motor guards, antenna holders, bumpers and small covers for the flight controller or power connector. Frame plates and arms themselves are usually cut from carbon fibre.
Which material should I use for these parts?
Authors usually state a material on the model page. Flexible filaments are common for guards and bumpers that absorb impacts, while stiffer filaments appear for brackets and adapters that must hold a shape.
Do these models need supports?
It depends on the geometry. Flat mounts often print without them, while parts with overhangs or deep pockets may need them. Check the notes and photos on the author's page before slicing.
How do I find a mount for my camera?
Search by the camera or air unit name together with the frame size, then compare the mounting hole spacing and the position of the lens opening with the dimensions listed on the model page.
相关
数码配件

Apex 5 Stand 3D Printing Models and STL Files

5905个模型
爱好与创客

FPV Apex Frame Parts: 3D Models and STL Files

21673个模型
交通工具

3D Models for FPV Drone Frames and Mounts

115929个模型
爱好与创客

Apex 5 Protection Parts as 3D Printing STL Files

4105个模型
微缩模型与战棋

Apex 5 FPV Frame Accessories: 3D Models and STL

103623个模型
数码配件

Flydigi Apex 5 Stick Parts: 3D Models and STL Files

2509个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录