音乐

Behringer Pedal 3D Models: Holders, Mounts, Parts

This collection gathers 3D printing files built around Behringer guitar pedals and the gear that surrounds them: holders, mounts, replacement cases and power accessories. It is useful when a stock enclosure, board layout or desk setup needs a part that does not exist off the shelf. Most entries are small STL pieces that print in a single run. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 45个模型 来自3个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月13日

查看合集 查看全部1441个模型 →
合集

从这里开始

合集中的全部模型

查看全部1441个模型
关于此分类

«Behringer Pedal 3D Models: Holders, Mounts, Parts»

The largest group covers ways to attach a pedal: clips that grip the enclosure, wall and board mounts, and brackets sized for common rail profiles. A second group deals with the enclosure itself, such as thinner or replacement cases and bottom plates, which matters when a pedal has to sit lower on a board or when the original part is lost. A third group is electrical and mechanical hardware around the chain, including adaptor housings, battery switches and supply holders, plus stands for small mixers and interfaces.

Before printing, read the author's page for the exact pedal version the part was drawn around, since enclosures differ between series and revisions. Check wall thickness, screw hole spacing, clip tension and whether the piece needs supports or a particular material to hold its shape. Where the model is a case or bottom plate, compare the listed internal dimensions with your own measurements, and look at photos of real prints to judge how the part sits once assembled.

Search results widen quickly if you use related wording: pedalboard mount, stomp box holder, enclosure replacement, footswitch cap, DC jack plate, or the name of the pedal series rather than the brand alone. Combining a part type with a mounting standard, such as rail profile or desk edge, usually narrows the list faster than adding more brand words.

FAQ

常见问题

Do these models fit every Behringer pedal?
No single part covers the whole range. Enclosure sizes and screw positions change between series and revisions, so compare the dimensions on the model page with your own pedal before printing.
What material works for a pedal holder?
Many people use PLA or PETG for indoor boards and a tougher filament where the part is flexed often. The author's notes usually state what the model was drawn and tested around.
Do I need supports for these parts?
It depends on the shape. Flat clips and plates often print without them, while brackets with overhangs may need supports or a different orientation on the bed.
Can I search for a part by pedal series instead of the brand?
Yes. Adding the series or model number, or a part name such as enclosure, bottom plate or footswitch, gives more precise results than the brand name on its own.
相关
音乐

3D-модели Behringer для студии и дома

1034个模型
数码配件

3D-модели педалей для симуляторов и велосипедов

10735个模型
音乐

3D-модели для Behringer: стойки и крепления для микшеров

49647个模型
交通工具

3D-модели педальных накладок для авто и симуляторов

3289个模型
电子产品

Педали и ручки потенциометра для 3D-печати

2095个模型
电子产品

3D-модели педалей и резисторов для самоделок и симуляторов

6344个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录