爱好与创客

Hydraulic 3D Models and STL Parts to Print

This collection gathers 3D models tied to hydraulics: pumps and fluid-moving parts, threaded adapters and fittings, caps and covers, plus scaled components for model vehicles. It is useful when a small plastic part is missing from a system or a toy and you would rather print it than search for a spare. Most entries are simple shapes, so a basic 3D printer and a bit of measuring are often enough to start. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自4个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月13日

查看合集 查看全部2916个模型 →
合集

从这里开始

合集中的全部模型

查看全部2916个模型
关于此分类

«Hydraulic 3D Models and STL Parts to Print»

The range splits into a few groups. Pumps and impeller-based mechanisms move water or oil and usually involve several parts that have to fit together. Adapters, hose barbs and thread gauges are single-piece items defined by their thread standard and diameter. Caps, plugs and covers protect open ports, while scaled hydraulic arms and loader parts belong to model building rather than real machinery.

When choosing a model, read the author's page for the thread or connection size, the number of parts, and whether the design expects glue, screws or press fits. Check the material and settings the author lists, since thin walls and fine threads behave differently in different filaments. Look at photos of real prints to judge surface quality and how the threads came out, and measure your own part before printing so the dimensions match.

If a search returns little, try synonyms and related terms: pump, impeller, lobe pump, gear pump, hose barb, BSP, NPT, O-ring, seal, dust cap, reservoir. Adding a scale or a machine name narrows model and toy parts, while searching by thread size or diameter helps with fittings. Related topics such as pneumatics, plumbing, irrigation and RC vehicles often contain parts that work the same way.

FAQ

常见问题

What kinds of hydraulic parts can be 3D printed?
Mostly non-pressure parts: covers, caps, adapters, brackets, seals for low-demand use, and scaled components for models and toys. Pumps and impellers appear too, but they are usually built as multi-part assemblies.
How do I match a thread on a printed fitting?
Identify the standard and size first, for example BSP or NPT and the nominal diameter, then compare it with the dimensions on the model page. A thread gauge or a caliper on the original part helps confirm the match before you print.
Which material should I use for hydraulic parts?
It depends on the load and the fluid. The author's page usually names a material and settings, so start there and consider how much stress and heat the part will see. For model and decorative parts, common filaments are usually enough.
Can printed parts replace original hydraulic components?
Printed parts are typically used where loads are low, as covers, adapters or model pieces. For pressurised systems, the decision depends on the specific application and should be judged by someone qualified.
相关
爱好与创客

Clay Molds, Cutters and Stamps: 3D Models for Printing

35038个模型
爱好与创客

Planetary Box 3D Models: Gearboxes and Puzzle Boxes

165548个模型
爱好与创客

3D Printing Files for RC Car Spares and Upgrades

83455个模型
爱好与创客

10-Inch FPV Drone 3D Models and STL Parts

82962个模型
爱好与创客

3D Models of Car Wheel Keychains and Rims

12199个模型
爱好与创客

Mountain Keychain 3D Models and STL Files

1530个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录