Heltec T114 and 18650 3D Models: Cases and Holders

«Heltec T114 and 18650 3D Models: Cases and Holders»

The models fall into a few groups. Board enclosures are shaped around the T114 and one cell, sometimes with a cutout for an antenna or a display. Other cases add room for a GPS module, a switch or a small keyboard, which makes them taller and wider. Separate from these are plain holders, trays, spacer grids and storage boxes for 18650 cells, plus multi-cell carriers used in larger battery packs.

Before printing, compare the model's stated dimensions with your own board and cell, since board revisions and connector layouts differ. Look at how the lid closes, whether screws, inserts or a snap fit are used, and how the cell is held in place. Check the wall thickness, the orientation the author recommends, and whether supports are needed. The material and slicer settings listed on the model page, together with photos of real prints, tell you more than the title does.

To narrow the results, search for the board name together with the cell count, for example a case for two cells, and try synonyms such as enclosure, housing, shell, caddy, tray or spacer. Related terms like Meshtastic, MeshCore, LoRa node, GPS module and antenna clearance bring up neighbouring designs. If nothing matches, look at remixes of similar cases and check the dimensions before scaling.