工具与设备

30 mm Diameter Clamp 3D Models and STL Files

This collection gathers 3D models for clamps and clips sized around a 30 mm diameter, from rotary-tool mounts to pipe and tube holders. You can use it to compare how different designs handle gripping, mounting and adjustment before opening a model page. Each listing may include STL files, part counts and notes for 3D printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 47个模型 来自7个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月12日

查看合集 查看全部272116个模型 →
合集

从这里开始

合集中的全部模型

查看全部272116个模型
关于此分类

«30 mm Diameter Clamp 3D Models and STL Files»

The results mix several families: rotary-tool brackets with wall mounts, pipe and tube clips that often come in diameter ranges, quick-release clamps for bars and rods, and parametric or hand-screw designs. Some are single-piece clips, while others use separate jaws, screws or locking arms. Diameter is the main filter, but the shape of the clamped object matters just as much.

When choosing a model, check the stated diameter range, wall thickness and the cross-section the clamp expects, such as round pipe, square tube or a tool body. Look at the number of parts, how they join, and whether the author notes supports or specific print orientation. Photos of real prints help show how the clamp closes and where stress falls.

To refine the search, try terms such as pipe clip, tube holder, rotary tool mount, wall bracket, parametric clamp or quick-release clamp. Adding the object type, for example shower rod, barbell, hose or cable, narrows results further. If a model uses a diameter range, search for the nearest size and check the author's notes for scaling limits.

FAQ

常见问题

How do I choose the right clamp diameter for a 30 mm object?
Measure the outside diameter of the pipe, tube or tool body at the point where the clamp will sit. If the model lists a range, compare that range with your measurement and allow for any tape, coating or insert.
Do 30 mm clamp models usually need supports?
It depends on the geometry. Flat clips and split clamps may print without them, while overhangs around screw holes or curved jaws often need support. Check the author's print notes and preview the layers in your slicer.
What materials work for a clamp around 30 mm?
The author's page usually names the material and settings used for the shown print. For parts that flex or carry load, many makers choose PETG, ABS or a tough PLA, but the choice depends on the clamp design and where it will be used.
Can I scale a 30 mm clamp model to fit another diameter?
Scaling changes wall thickness, screw holes and fit, so it may not work for every design. Parametric models are easier to adjust because you can change the diameter value before exporting the STL.
相关
工具与设备

3D Models of 30 mm Pipe Clamps and STL Mounts

8314个模型
工具与设备

Clamp 3D Models: Pipe, Hose and Yoke STL Files

2213个模型
综合搜索

3D Models for 40 mm Diameter Parts and Fittings

65538个模型
物品

Pool Clamp 3D Models and STL Files for 3D Printing

2739个模型
打印机配件

Belt Clamps for 3D Printer: STL Models

1366717个模型
物品

3D Models of Clamps and Cable Ties for Printing

22036个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录