3D Models for Bicycle Rear Light Mounts

«3D Models for Bicycle Rear Light Mounts»

The models differ mainly in where they attach and how the light is held. Seatpost and saddle rail versions clamp around a tube or a rail; handlebar brackets wrap a bar and often add a swivel; camera-interface adapters replace the original clamp with a standard action-camera plate; trike and recumbent designs use longer arms or plate extensions to move the lamp outward. Some files are a single printed piece, others are printed in two parts and joined with a screw or a bolt.

Before printing, measure the tube diameter or rail spacing at the mounting point, the width of the light body and the distance between its screw holes, and the angle you want the lamp to face. Read what the author lists about material and settings, and look at photos of real prints to judge wall thickness around the clamp. Check whether the model needs supports, how many fasteners it takes and whether the arm has enough clearance for a saddle bag or a rack.

To widen the search, try synonyms such as tail light, taillight, rear lamp, back light, bracket, holder, clamp and adapter, and combine them with seatpost, saddle rail, rack, fender or action camera. Related topics include bike light brackets for the front, reflector and plate mounts, and camera mounts that share the same interface. Narrowing by the part of the bike rather than by the light model usually returns more usable results.