交通工具

Fuel Tank Cap STL Models for 3D Printing

This collection gathers 3D models of fuel tank caps and the parts that go with them: caps for cars and small engines, holders, retaining rings, cables and scale tanks for models. It is useful when an original cap is lost, cracked or hard to find, and a printed replacement or adapter is easier to make than to order. Most files are small, so they fit on a compact 3D printer and print in a short session. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自8个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月12日

查看合集 查看全部99217个模型 →
合集

从这里开始

合集中的全部模型

查看全部99217个模型
关于此分类

«Fuel Tank Cap STL Models for 3D Printing»

The range splits into several groups. There are caps for passenger cars and SUVs, caps for walk-behind tractors, brushcutters and other small engines, and parts that hold or tether a cap, such as holders, rings and cables. A separate group covers motorcycles and RC vehicles, where caps and tanks are scaled down, and another covers tools and small accessories like keys, knobs and vent adapters.

When choosing a model, look at the author's page for the cap diameter and thread pitch, since a printed cap has to match the filler neck. Check how many parts the file contains and whether they are joined by screws, pins or glue, and whether the geometry needs supports. The material matters too: parts that stay in contact with fuel are usually printed in petrol-resistant filaments, while covers and holders can use common ones. Photos of real prints show how the threads and sealing surfaces came out.

To narrow the search, try synonyms and related terms: gas cap, filler cap, tank cover, cap holder, retaining ring, cap tether, vent cap, or the type of machine the cap belongs to, such as walk-behind tractor, brushcutter, outboard engine or RC car. Searching by the filler neck diameter or thread size often works better than by vehicle name. Related topics worth checking are funnels, tank vents, fuel line clips and scale model fuel tanks.

FAQ

常见问题

How do I find a cap that fits my filler neck?
Compare the diameter and thread pitch given on the model page with your filler neck. If the file only gives a diameter, measure the neck across the threads and check whether the model uses a straight or tapered thread.
Do printed fuel caps need a seal or gasket?
Many designs include a groove or recess for an O-ring or a cut gasket. Check the model page for the seal size, and note that the material you print in affects how the part behaves around fuel.
Which parts are usually printed besides the cap itself?
Holders, retaining rings, tethers, cables and vent adapters appear often, as do small tools for opening or tightening a cap. These are usually simpler shapes and need fewer supports.
Can these files be scaled for a model or a smaller engine?
Scaling changes the thread, so a scaled cap will not match the original neck. If you need a smaller version, look for a file that was drawn at that scale, such as RC or model train parts.
相关
交通工具

BRP Fuel Cap 3D Models and STL Files

12626个模型
交通工具

Chevrolet Fuel Cap 3D Models and STL Files

12240个模型
交通工具

Fuel Tank Cap and Cover 3D Models in STL

8348个模型
交通工具

3D Models of Fuel Filler and Tank Covers

141051个模型
交通工具

Haval Fuel Cap Holder 3D Models and STL Files

632873个模型
交通工具

Renault Megane Fuel Cap 3D Models and STL

3188个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录