玩具与手办

LEGO Technic Beam 7x3x3 STL Models for 3D Printing

This collection gathers 3D-printable LEGO Technic beam models: straight liftarms in many lengths, thin and curved pieces, and larger brick assortments. Each listing leads to a model page where you can compare dimensions and hole spacing before printing. It helps when a build calls for a beam length or shape that is awkward to source as a physical part. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自3个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月15日

查看合集 查看全部2541个模型 →
合集

从这里开始

合集中的全部模型

查看全部2541个模型
关于此分类

«LEGO Technic Beam 7x3x3 STL Models for 3D Printing»

The models differ mainly in geometry. Straight liftarms come in a range of lengths measured in studs, with round cross-holes at regular spacing. Thin beams use a narrower profile, while curved and angled pieces, including perpendicular connectors, change the direction of a structure. Larger sets mix beams with bricks and plates, and some listings offer long or generated beams that can be trimmed to the size you need.

Before printing, read the model page rather than the thumbnail. Check the stated length in studs, the hole diameter and spacing, and the wall thickness around each hole, since these decide whether axles and pins fit. Look at how the part is split for printing, whether the author reports supports, and which material and settings were used. Photos of real prints are the most useful guide to surface finish and hole accuracy.

If the first results are thin, try other names for the same part: liftarm, cross-hole beam, studless beam, technic brick, frame or connector. Searching by length in studs or by a part number often narrows things faster than a shape description. Related terms such as axle, pin, gear rack or steering arm can also surface beams used inside larger mechanisms.

FAQ

常见问题

What counts as a Technic beam model here?
Listings that reproduce the beam and liftarm shapes used in studless construction, usually with round cross-holes along the part. Some entries are single beams, others are assortments that include bricks, plates and connectors.
How do I pick the right length?
Decide the length in studs first, then compare it with the dimensions on the model page. A part that is one stud short or long will not line up with the rest of the structure, so the hole count matters more than the overall look.
Do these beam models need supports?
It depends on the orientation and on how the author split the part. Flat beams often print without them, while curved pieces or long spans may need them under overhangs. The model page usually states what the author used.
Can I scale a beam to get a different length?
Scaling changes hole spacing and hole diameter together, so pins and axles may no longer fit. It is usually better to find a model drawn at the length you need than to resize an existing one.
相关
玩具与手办

LEGO Technic Beam STL Models for 3D Printing

33523个模型
玩具与手办

LEGO Technic Frame STL Models for 3D Printing

63288个模型
玩具与手办

LEGO Technic Panels: 3D Models and STL Files

50486个模型
玩具与手办

LEGO Technic Rack Parts: 3D Models and STL Files

60035个模型
玩具与手办

LEGO Technic Parts: 3D Models and STL Files

4106个模型
玩具与手办

LEGO Technic Forklift and Beam STL Models for 3D Printing

4506个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录