交通工具

FPV Boat Motor 3D Models and STL Mounts

This collection gathers STL files for FPV and RC boat drives: hulls, outboard and jet units, and the mounts that hold brushless motors in place. It is useful when you are building a small watercraft and need a printed part that matches a specific motor or hull. Each model page is written by its author, so the details you need for 3D printing sit there rather than here. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自3个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月15日

查看合集 查看全部8997个模型 →
合集

从这里开始

合集中的全部模型

查看全部8997个模型
关于此分类

«FPV Boat Motor 3D Models and STL Mounts»

The models fall into a few groups. Some are complete hulls designed around one or two motors, including flat-bottom airboats and swamp boats. Others are propulsion parts only: outboard legs, jet housings, impellers and long-tail mud motor assemblies. A third group is purely mechanical — mounts, clamps and lock straps that adapt a brushless motor to a hull or to a drone-style air frame.

When you open a model, check the motor size it was drawn around, since a mount for one can diameter rarely fits another. Look at the number of separate parts, how they join, and whether the author shows the screws or shafts used. Read the listed material and settings, and compare them with photos of real prints, which often reveal wall thickness and how the part behaves under load.

Search terms shift depending on what you need. Try "jet drive", "impeller", "outboard leg" or "propulsion" for the drive side, and "motor mount", "clamp" or "strap" for the mechanical side. Hull searches work better with shape words such as "airboat", "catamaran" or "swamp boat", and adding the motor can diameter or a scale figure narrows the list further.

FAQ

常见问题

What scale are these boat motor models?
Scale varies by author, and some parts are drawn to fit a specific commercial hull or motor rather than a fixed scale. Check the dimensions on the model page and compare them with the motor you plan to use before printing.
Do the motor mounts need supports?
It depends on the geometry. Mounts with overhanging arms or closed rings often need them, while flat plates usually do not. The author's page is the place to look for the orientation and support settings they used.
Which material works for a boat motor mount?
Authors usually list the filament they printed with, and stiffer materials are common for parts that carry vibration. Read that note together with any photos of finished prints, then decide what fits your own setup.
Can I adapt a mount to a different motor?
Sometimes, if the hole spacing and shaft opening are close to your motor. Many files are parametric or include several hole patterns, so check the source files and dimensions before scaling anything.
相关
交通工具

3D打印船外机模型与遥控船配件

47470个模型
交通工具

Boat Steering Wheel 3D Models and STL Files

3393个模型
交通工具

Outboard Motor Parts: 3D Models and STL Files

2691个模型
运动健身

3D打印船用舷外机支架模型

7151个模型
交通工具

Boat Motor Mounts: 3D Models and STL Files

11373个模型
交通工具

3D Models for Outboard Motor Repair Parts

2567个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录