家居日用

Intex Hose Adapter 3D Models: STL Pool Fittings

This collection gathers 3D-printable adapters that link pool hoses to pumps, skimmers and vacuum lines, along with reducers between common diameters. The parts are small enough for most 3D printers, so a single spool often covers several fittings. It helps when an original connector is missing or when two hoses of different sizes have to meet. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自4个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月15日

查看合集 查看全部12357个模型 →
合集

从这里开始

合集中的全部模型

查看全部12357个模型
关于此分类

«Intex Hose Adapter 3D Models: STL Pool Fittings»

The models fall into a few groups. Straight couplers join two hoses of the same diameter, while intake and outlet fittings sit between the pump port and the hose. Skimmer and vacuum adapters add a bend or a bayonet twist, and reducers step one diameter down to another. Some entries are not pool parts at all but shop-vac, duct or vacuum-hose adapters built on the same principle.

Before printing, read the dimensions on the model page rather than judging by the photo. Note the inner and outer diameter of both ends, the thread type if there is one, and the wall thickness at the narrowest point. Check whether the author lists supports, orientation, material and settings, and look at photos of real prints to see how the surfaces and threads came out.

If the first search gives few results, try other words for the same object: connector, coupler, reducer, fitting, bayonet or step-down. Adding a diameter such as 32 mm, 38 mm or 1.25 inch narrows the list quickly. Related searches include pool skimmer, return nozzle, backwash hose, vacuum plate and hose support bracket.

FAQ

常见问题

What measurements do I need before choosing an adapter?
Measure the inner and outer diameter of the hose and of the port it must enter, and note whether the connection is threaded or pushed on. Compare those numbers with the dimensions the author lists on the model page.
Can one adapter join hoses of two different diameters?
Reducers are made for that, with one end sized for the larger hose and one for the smaller. Check both ends separately, since a single stated size usually refers to only one of them.
Which material works for a pool hose adapter?
Authors often list the filament and settings they used, and some note that parts exposed to water and sun are printed in materials other than plain PLA. Follow the settings given on the model page and test the fit before relying on it.
Why do some of these adapters need supports?
Overhanging rims, threads and barbed ends often require them. The model page usually shows the orientation the author used, which is the simplest way to keep the opening round.
相关
园艺

3D打印T形软管转接头模型

12896个模型
园艺

Water Hose Adapter 3D Models and STL Files

12201个模型
工具与设备

1½英寸转接头3D打印模型

1273060个模型
工具与设备

3D打印转接件与料盘适配器模型

179891个模型
家居日用

3D打印软管转接头模型合集

68004个模型
家居日用

3D打印软管固定夹与卡扣模型

1942个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录