家居日用

3D Models for Shelves Above Light Switches

This collection gathers 3D models that put a small shelf, ledge or hook where a light switch or outlet already sits on the wall. Most of them are printed as a replacement cover or as a bracket that wraps around the existing plate. It is a practical corner of 3D printing: a few grams of filament, a short print, and a place to drop keys, a remote or a phone. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自3个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月14日

查看合集 查看全部5793个模型 →
合集

从这里开始

合集中的全部模型

查看全部5793个模型
关于此分类

«3D Models for Shelves Above Light Switches»

The models fall into a few groups. Some are full switch covers with a tray or lip on top, so the shelf and the cover are one printed piece. Others keep the original plate and add a bracket, a hook or a rack that clips or screws around it. There are also plain mini shelves for outlets and scalable wall shelf sets that can be extended sideways.

When choosing a model, look at how it attaches: a screw-through cover, a clip, or an adhesive pad, and whether the author shows the switch plate dimensions it was drawn around. Check the number of parts, whether the tray has a lip or a rail, and how thick the walls are where the shelf meets the mount, since that joint carries the load. The author's page usually lists the material, layer height and whether supports are needed; photos of real prints show how the cover sits against the wall.

Measure your own switch plate and the space above it before printing, because plate sizes differ between regions and a cover drawn for one frame may not line up with yours. If you want a different result, try related terms: switch plate shelf, outlet shelf, key hook cover, wall organizer, cable holder, or small floating shelf. Note that "switch" in titles also refers to game consoles, so adding words like light, wall or outlet keeps the results on topic.

FAQ

常见问题

What is a shelf above a light switch used for?
It gives you a small flat surface or hook right where you already reach for the light. Typical uses are keys, a remote control, a phone, or small items that would otherwise sit on the floor.
Do these models replace the existing switch plate?
Some do: they are printed as a complete cover that screws on in place of the original. Others are add-on brackets or trays that fit around the plate that is already there.
What should I check before printing one?
Compare the plate dimensions in the model description with your own, and look at how the shelf is joined to the mount. The author's notes on material, layer height and supports tell you how the part was intended to be printed.
Can I scale a shelf model to fit my wall?
Scaling changes the screw holes and the fit around the plate as well as the shelf, so it works only if the mounting points stay aligned. It is usually easier to pick a model drawn for a similar plate size.
相关
数码配件

3D打印灯开关面板装饰模型

152224个模型
家居日用

3D打印层板支架模型合集

276703个模型
家居日用

龙形书架 3D打印模型

191188个模型
家居日用

3D Models of Wall Shelves and STL Shelf Systems

13188个模型
家居日用

3D打印墙上置物架模型

499088个模型
家居日用

Skadis Shelf 3D Models and STL Files

3399个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录