园艺

Garden Sprayer 3D Models: Nozzles, Handles, Mounts

This collection gathers STL files for garden sprayers and the parts around them: nozzles, handles, holders, joints and small irrigation fittings. It is useful when a plastic part of an existing sprayer breaks or when you want a different spray pattern without buying a whole new unit. Most of these models are small enough to print on a common 3D printer in one session. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自4个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月14日

查看合集 查看全部1551个模型 →
合集

从这里开始

合集中的全部模型

查看全部1551个模型
关于此分类

«Garden Sprayer 3D Models: Nozzles, Handles, Mounts»

The models fall into a few groups. Nozzles and spray heads cover fixed and adjustable flow, trigger designs and simple hose-end shapes. Handles, triggers and repair pieces replace worn or cracked parts of an existing sprayer. Holders, brackets and mounts keep the sprayer on a wall, a tap or a hose reel, while joints, adapters and quick couplings connect hoses of different diameters. Irrigation stakes and inline units sit closer to the ground or mix water with fertilizer.

Before printing, read the author's page: overall size and thread standard, number of parts and how they assemble, whether supports are needed, and the material and settings the author lists. Threads and snap fits depend on printer calibration, so check the photos of real prints and the comments. For outdoor use, consider how the part will behave in sun and frost, and whether it needs a seal or an O-ring to stay watertight.

If the results are too narrow, try other wording: hose nozzle, spray head, tap adapter, hose connector, quick coupling, irrigation fitting, trigger handle, wall mount. Related topics such as drip irrigation, garden hose reels, watering cans and greenhouse fittings often use the same threads and diameters, so parts from those searches may fit your setup as well.

FAQ

常见问题

What do I need to measure before printing a sprayer part?
Measure the thread diameter and pitch, the hose diameter and the length of the part you are replacing. Compare these with the dimensions the author lists on the model page.
Which material works for garden sprayer parts?
Authors often list PETG, ASA or another weather-resistant filament for outdoor parts. Check the material and settings on the model page and match them to how the part will be used.
Do these models need supports?
It depends on the geometry: nozzles with internal channels and brackets with overhangs often do, while flat plates and simple handles may not. The author's page usually states this.
Can I adapt a model to a different hose size?
Yes, if the source file is parametric or you can scale it. Scaling changes threads as well, so check the new diameter against your hose or tap before printing.
相关
园艺

Garden Hose 3D Models: Connectors, Nozzles, Holders

7135个模型
园艺

3D Models of Garden Tools and Organizers

243270个模型
园艺

花园装饰3D打印模型与STL文件

194549个模型
园艺

Garden Watering 3D Models: Cans, Spikes, Sprinklers

4601个模型
园艺

Garden Watering Can 3D Models and STL Files

7600个模型
园艺

Garden Gnome STL Models for 3D Printing

60395个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录