园艺

Moss Poles and Plant Supports: 3D Models to Print

This collection gathers STL files for moss poles and the parts that go with them: pole sections, clips, planters and climbing supports. Most designs are made for 3D printing in several pieces, so the height of a pole can grow with the plant. It helps when you need a support that matches a particular pot or stem thickness instead of a ready-made one. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自4个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月11日

查看合集 查看全部83633个模型 →
合集

从这里开始

合集中的全部模型

查看全部83633个模型
关于此分类

«Moss Poles and Plant Supports: 3D Models to Print»

Modular pole sections form the largest group: they stack or screw together and often have a hollow or textured core meant to hold sphagnum moss or coir. Clips and holders are smaller prints that attach a stem to a pole or a stake at a chosen height. Planters and wide-base pots also appear, some with a socket for a pole, and a few pieces borrow shapes from figures or vases.

Before printing, read the author's page: section diameter, wall thickness, joint or thread type, and how many parts a full pole takes. Check whether the design expects a printed base, a pot insert or a weighted foot, and which filament and settings the author lists. Photos of finished prints show how the texture and the joints look in practice.

Results widen if you try other names: moss pole, coir pole, plant stake, trellis, climbing support, pole extension, planter with pole socket. Related topics such as aroid planters, epiphyte holders, monstera supports or garden spikes lead to models that solve the same problem in another way.

FAQ

常见问题

How tall should a printed moss pole be?
It depends on the plant and the pot. Many designs are modular, so you print sections and add them as the stem grows; check the joint type before printing a long run.
Which filament works for a pole that stays damp?
Authors usually list the material they used, and some note how moisture and sunlight affect a print over time. Read that note together with the recommended settings on the model page.
Do these parts print without extra support structures?
Some print upright with none, while overhangs and clips may need them. The author's page normally states the orientation the part was designed for.
Can a pole be adapted to a pot I already have?
Often yes, if the model includes a base or an insert that can be scaled slightly, but check the joint fit afterwards. A separate socket or clip is usually easier to adjust than a whole pole.
相关
建筑与沙盘

3D Models of Pillars, Columns and Posts

9262个模型
园艺

STL Models for Plants, Pots and Planters

107026个模型
园艺

3D Models for Post Caps and Post Toppers

12430个模型
物品

Pole Covers and Caps: STL Models for 3D Printing

3819个模型
园艺

Plant Stand 3D Models and STL Files

5457个模型
园艺

Plant Holder STL Models for 3D Printing

556106个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录