工具与设备

3D printing parts for thicknessers: STL adapters

This collection covers STL files made for planer-thicknessers: dust ports, hose adapters, replacement gears, handles and small fittings. Most of these parts address something a stock machine does not provide, from chip extraction to a broken lever. Each entry leads to the author's page, where the part itself is described. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自3个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月11日

查看合集 查看全部136070个模型 →
合集

从这里开始

合集中的全部模型

查看全部136070个模型
关于此分类

«3D printing parts for thicknessers: STL adapters»

The models fall into a few groups. Dust extraction parts dominate: ports that change the outlet size, connectors that join a hose to the machine, and adapters that step one diameter down to another. A second group is mechanical — gears, sprockets and drive components that wear or break. A third is small hardware: handles, levers, plugs and holders that keep accessories in place on a bench.

When choosing a part, start with measurements. Note the outer diameter of the machine port, the inner diameter of the hose or fitting, the thread if there is one, and the wall thickness the part needs. For gears and load-bearing pieces, look at the tooth profile, the material and settings the author lists, and the orientation used on the bed. Photos of real prints are the most useful check, since they show how the part actually came out.

Search results improve when you vary the wording. Try planer, planer-thicknesser, jointer-planer, chip extraction, dust collection, hose adapter and vacuum adapter as alternatives, and add the port size or thread to narrow things down. Related topics such as workshop dust collection, shop vacuum fittings and machine maintenance often surface the same parts under different names.

FAQ

常见问题

What should I measure before printing a dust port adapter?
Measure the outer diameter of the machine outlet and the inner diameter of the hose or fitting you want to connect, then check the wall thickness the model expects. Small differences in these numbers decide whether the adapter sits correctly.
Can a printed gear be used in a thicknesser?
Printed gears appear in this collection, but a gear carries load, so the author's page matters. Check the tooth profile, the material and settings listed, and how the part is oriented on the bed, then compare the photos with the original part.
Which material do these parts use?
Authors usually state the material and settings on the model page. Stiffer filaments are common for parts under load, while adapters that need some give are often printed in flexible ones. Read the page rather than assuming a single answer.
How do I find an adapter for a machine that is not listed?
Search by the port diameter or thread instead of the machine name, using terms like 100 mm dust port, threaded adapter or hose connector. Related searches such as chip extraction or dust collection often bring up the same parts.
相关
工具与设备

Parkside Battery Adapter 3D Models and STL Files

12195个模型
工具与设备

3D Printing Sloped End Caps and Plugs

125178个模型
工具与设备

French Stiletto and Themed 3D Models to Print

1994个模型
工具与设备

Router Baskets and Mounts: 3D Models

23008个模型
工具与设备

Metal Detector 3D Models: Coils, Cases, Stands

25426个模型
工具与设备

Pressure Valve Nuts: 3D Models and STL Files

5617个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录