综合搜索

Profile End Caps: 3D Models and STL Files

This collection gathers 3D models of caps, plugs and covers that close off the ends of profiles and tubes. It covers standard aluminium extrusions, square and rectangular steel tube, LED channels and small port covers, all prepared for 3D printing. Use it when you need a finished end instead of an open cut. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自8个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月10日

查看合集 查看全部66808个模型 →
合集

从这里开始

合集中的全部模型

查看全部66808个模型
关于此分类

«Profile End Caps: 3D Models and STL Files»

The models fall into a few groups. Extrusion caps are made for the common aluminium sizes used in frames and machine builds, while tube caps target square and rectangular steel sections. Parametric generators let you enter width, height and length before exporting an STL, and a separate group closes LED strip channels or small connector openings.

Measure the profile before you download anything. Note the outer width and height, the wall thickness and the corner radius, then decide whether you want a plug that sits inside the opening or a sleeve that wraps around the outside. On the author's model page, look at the listed material and print settings, whether supports are needed, and photos of real prints.

If a search returns little, try other words for the same object: end cap, plug, cover, bung, insert or blanking plate. Adding the profile size, such as 2020, 4040 or 20x40, narrows the results quickly. Related searches that often lead to useful parts include extrusion brackets, corner connectors, cable clips and diffusers for LED channels.

FAQ

常见问题

How do I pick the right cap size for a profile?
Measure the outer width and height of the profile and the wall thickness of the section. Then check whether the model is a plug that goes inside the opening or a sleeve that covers the outside edge, since the two need different dimensions.
Do profile caps need support material when printing?
Many are simple, flat-bottomed shapes that print without supports. Taller or hollowed designs may need them, so read the notes and photos on the author's model page before slicing.
Can I change the dimensions of a parametric cap?
Yes. Generator-style models usually expose width, height, length and wall thickness as parameters, which you set before exporting the STL. Check the limits the author lists for the smallest and largest sizes.
Which material is used for these caps?
PLA and PETG appear often because they print easily and hold their shape. The author's page usually states the material and settings used, which is a useful starting point for your own print.
相关
工具与设备

3D Models of Profile End Caps for 40x60 and Similar Profiles

241831个模型
工具与设备

3D Models of 60x40 Profile End Caps

12670个模型
物品

Angled Rectangular Profile Plugs: 3D Models and STL

3873个模型
工具与设备

3D Models for Profile Templates and Extrusions

2802个模型
玩具与手办

3D Models for Shadow Profiles and Profile Parts

18432个模型
工具与设备

Drywall Profile Holder 3D Models and STL Files

519980个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录