Gadgets

3D Models for Charging Port Covers and Plugs

This collection gathers 3D models that protect, extend or replace the charging socket on e-scooters and similar small electric vehicles. You will find simple caps, plugs, socket extenders and mounts that hold a charger in place. It is useful when a stock cover is missing or when a cable needs a tidier route, and every file can be checked before you send it to a 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Der Text dieser Sammlung ist auf Englisch verfasst; die Suche selbst funktioniert in jeder Sprache.

Eine Sammlung von Polyzon · 48 Modelle von 4 Plattformen

So entsteht diese Sammlung

Polyzon stellt diese Sammlung aus den Suchergebnissen der angebundenen Plattformen zusammen. Dubletten und Modelle ohne Vorschaubild werden entfernt, schwache Treffer rutschen ans Ende, der Rest bleibt in der Reihenfolge der Suche. Die Modelle gehören ihren Urhebern – die Bedingungen findest du auf der Seite des jeweiligen Modells.

Auswahlregeln: Polyzon-Redaktion · Text aktualisiert: 12.10.2026

Sammlung ansehen Alle anzeigen: 5496 Modelle →
Sammlung

Für den Einstieg

Alle Modelle dieser Sammlung

Alle anzeigen: 5496 Modelle
Über die Kategorie

«3D Models for Charging Port Covers and Plugs»

The models differ mainly in how they attach and what they replace. A cap usually presses over the opening or clips onto the housing, a plug sits inside the socket, and an extender moves the contact point outward so a larger connector can reach it. Some parts combine the socket with a power button or a throttle adapter, while others are brackets that keep a charger from sliding around.

Before printing, look at the dimensions the author gives and compare them with the opening on your own vehicle. Check how many separate pieces the model has, whether they screw or snap together, and whether the geometry needs supports. The material matters too: flexible filament suits thin covers that must bend, while rigid plastics are common for parts that carry a connector. Photos of installed prints on the model page tell you more than a render.

To widen the results, try other words for the same part: cap, plug, dust cover, rain cover, connector, socket, extender or adapter. Searching by the connector type rather than the vehicle name often brings up more options. Related topics such as scooter accessories, charger brackets and covers for other personal electric vehicles can also be worth a look.

FAQ

Häufige Fragen

Which material works for a charging port cover?
Flexible filament is often chosen for thin covers that clip on, while rigid plastics are used for parts that hold a connector or replace a socket. The author's notes usually state what was used.
Do these parts need supports?
Flat covers and simple plugs often print without them, while parts with overhangs or deep recesses may need them. Check the orientation shown on the model page before slicing.
How do I check that a cover matches my scooter?
Measure the opening and the surrounding housing, then compare those figures with the dimensions listed by the author. Photos of the part installed are a good second check.
Can I search by connector type instead of vehicle model?
Yes. Terms such as charging socket, connector cap, dust plug or port extender describe the part itself and can return results that a model name would miss.
Ähnliches
Gadgets

Charging Port 3D Models: Covers, Plugs, Cleaners

6171 Modelle
Gadgets

3D Models for Scooter Charging Port Plugs and Caps

2855 Modelle
Gadgets

3D Printing Models for Chargers and Stands

62646 Modelle
Gadgets

Charging Holder STL Models for 3D Printing

510965 Modelle
Gadgets

Phone Charger 3D Models: Stands, Mounts and Docks

111126 Modelle
Objekte

Ninebot E-Scooter 3D Models and STL Parts

1649 Modelle

Alle Kategorien für 3D-⁠Modelle

Der komplette Themenkatalog – von Wohnen & Haushalt bis CNC, mit Suche auf allen angebundenen Plattformen.

Zum Kategorienkatalog