Pratik gereçler

3D Models for Charging Port Covers and Plugs

This collection gathers 3D models that protect, extend or replace the charging socket on e-scooters and similar small electric vehicles. You will find simple caps, plugs, socket extenders and mounts that hold a charger in place. It is useful when a stock cover is missing or when a cable needs a tidier route, and every file can be checked before you send it to a 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 5496 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 5496 model
Kategori hakkında

«3D Models for Charging Port Covers and Plugs»

The models differ mainly in how they attach and what they replace. A cap usually presses over the opening or clips onto the housing, a plug sits inside the socket, and an extender moves the contact point outward so a larger connector can reach it. Some parts combine the socket with a power button or a throttle adapter, while others are brackets that keep a charger from sliding around.

Before printing, look at the dimensions the author gives and compare them with the opening on your own vehicle. Check how many separate pieces the model has, whether they screw or snap together, and whether the geometry needs supports. The material matters too: flexible filament suits thin covers that must bend, while rigid plastics are common for parts that carry a connector. Photos of installed prints on the model page tell you more than a render.

To widen the results, try other words for the same part: cap, plug, dust cover, rain cover, connector, socket, extender or adapter. Searching by the connector type rather than the vehicle name often brings up more options. Related topics such as scooter accessories, charger brackets and covers for other personal electric vehicles can also be worth a look.

FAQ

Sıkça sorulan sorular

Which material works for a charging port cover?
Flexible filament is often chosen for thin covers that clip on, while rigid plastics are used for parts that hold a connector or replace a socket. The author's notes usually state what was used.
Do these parts need supports?
Flat covers and simple plugs often print without them, while parts with overhangs or deep recesses may need them. Check the orientation shown on the model page before slicing.
How do I check that a cover matches my scooter?
Measure the opening and the surrounding housing, then compare those figures with the dimensions listed by the author. Photos of the part installed are a good second check.
Can I search by connector type instead of vehicle model?
Yes. Terms such as charging socket, connector cap, dust plug or port extender describe the part itself and can return results that a model name would miss.
İlgili
Pratik gereçler

Charging Port 3D Models: Covers, Plugs, Cleaners

6171 model
Pratik gereçler

3D Models for Scooter Charging Port Plugs and Caps

2855 model
Pratik gereçler

3D Printing Models for Chargers and Stands

62646 model
Pratik gereçler

Charging Holder STL Models for 3D Printing

510965 model
Pratik gereçler

Phone Charger 3D Models: Stands, Mounts and Docks

111126 model
Nesneler

Ninebot E-Scooter 3D Models and STL Parts

1649 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç