Garden

Pool Hose Holders and 38 mm Fittings: 3D Models

This collection gathers 3D models for above-ground pool plumbing: hose holders, brackets, adapters and clamps sized around 32 mm and 38 mm lines. Most of them are small parts that are awkward to buy separately, which makes 3D printing a practical route. You can browse the files, compare dimensions and pick what matches your own setup. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

A Polyzon collection · 48 models from 3 platforms

How this collection is put together

Polyzon assembles this collection from search results on the connected platforms. Repeats and models without a preview are removed, weak matches go to the end, and the rest keeps the search order. Models belong to their authors — check the terms on each model's page.

Selection rules: the Polyzon editorial team · Text updated 2026-10-14

View the collection Show all: 2250 models →
Collection

Start here

All models in this collection

Show all: 2250 models
About the category

«Pool Hose Holders and 38 mm Fittings: 3D Models»

The models fall into a few groups. Support brackets and holders keep a hose off the ground or hold it against a frame, while adapters and reducers join hoses of different diameters or connect a hose to a pump, inlet or skimmer. Clamps and junction fittings secure the connection itself, and a smaller group covers plunger valve and jet parts. Some files are single-piece prints, others are split for easier orientation on the build plate.

Before printing, measure the actual outer diameter of your hose and the thread or socket it has to meet, since nominal 32 mm and 38 mm sizes vary between manufacturers. Look at the author's page for wall thickness, number of parts, whether supports are needed and which material and settings are listed. For parts left in sun and chlorinated water, authors often name PETG or ASA rather than PLA. Photos of real prints help you judge how a threaded or snap-fit section comes out at your layer height.

To widen the results, try synonyms such as hose support, bracket, holder, clamp, adapter, reducer, junction and fitting, and combine them with the diameter you need. Related searches include plunger valve, jet, inlet, skimmer, vacuum plate and pump connection, as well as above-ground pool frames. Adding the printer or build volume you use can surface remixes scaled for a smaller bed.

FAQ

Frequently asked questions

What should I measure before printing a pool hose holder?
Measure the outer diameter of the hose, the diameter or thread of the port it connects to, and the space where the holder has to sit. Nominal 32 mm and 38 mm hoses differ slightly between manufacturers, so a caliper reading is more useful than the label.
Which filament is used for pool parts?
Authors commonly list PETG or ASA for parts exposed to sunlight and chlorinated water, and PLA for indoor or dry fittings. Check the material and settings on the model page and compare with how the part will be used.
Do these brackets and adapters need supports?
It depends on the overhangs and how the model is oriented. Many holders print without supports when laid flat, while threaded adapters may need them or a different orientation. The author's notes and photos of printed parts usually show the intended direction.
Can a 38 mm holder be used with a 32 mm hose?
Not directly, since the bore and clamping surface differ. Adapters and reducers that step between 32 mm and 38 mm appear in this topic, so check the stated dimensions before choosing one.
Related
Home & household

Pool Valve 3D Models: STL Parts and Adapters

2502 models
Garden

3D Models for Pool and Garden Hose Mounts

12148 models
Garden

Garden Hose Holder 3D Models: Wall Mounts and STL Files

620150 models
Garden

Garden Hose Holder in Barrel: 3D Models and STL

12065 models
Garden

3D Models for Garden Hose Holders and Barrel Fittings

5055 models
Garden

STL Models for Tillandsia Greenhouses and Mini Enclosures

16029 models

All 3D model categories

The full catalog of topics — from home & household to CNC, searchable across the connected sources.

Open the category catalog