Pool Hose Holders and 38 mm Fittings: 3D Models

«Pool Hose Holders and 38 mm Fittings: 3D Models»

The models fall into a few groups. Support brackets and holders keep a hose off the ground or hold it against a frame, while adapters and reducers join hoses of different diameters or connect a hose to a pump, inlet or skimmer. Clamps and junction fittings secure the connection itself, and a smaller group covers plunger valve and jet parts. Some files are single-piece prints, others are split for easier orientation on the build plate.

Before printing, measure the actual outer diameter of your hose and the thread or socket it has to meet, since nominal 32 mm and 38 mm sizes vary between manufacturers. Look at the author's page for wall thickness, number of parts, whether supports are needed and which material and settings are listed. For parts left in sun and chlorinated water, authors often name PETG or ASA rather than PLA. Photos of real prints help you judge how a threaded or snap-fit section comes out at your layer height.

To widen the results, try synonyms such as hose support, bracket, holder, clamp, adapter, reducer, junction and fitting, and combine them with the diameter you need. Related searches include plunger valve, jet, inlet, skimmer, vacuum plate and pump connection, as well as above-ground pool frames. Adding the printer or build volume you use can surface remixes scaled for a smaller bed.