Gadgets

Camera and Phone Stand 3D Models to Print

This collection gathers 3D models for camera and phone stands: desk holders, tripods, arms and mounts for small cameras. Most files are made for FDM 3D printing and come as STL, so you can adjust the scale in a slicer before you print. It helps when you need a fixed angle for recording, streaming or photographing small parts. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

A Polyzon collection · 48 models from 3 platforms

How this collection is put together

Polyzon assembles this collection from search results on the connected platforms. Repeats and models without a preview are removed, weak matches go to the end, and the rest keeps the search order. Models belong to their authors — check the terms on each model's page.

Selection rules: the Polyzon editorial team · Text updated 2026-10-15

View the collection Show all: 10655 models →
Collection

Start here

All models in this collection

Show all: 10655 models
About the category

«Camera and Phone Stand 3D Models to Print»

Desk stands keep a phone or a small camera upright at a set angle, while tripod and arm mounts move the device away from the table. Foldable designs pack flat and often use printed hinges or sliding locks; fixed stands are simpler and need fewer parts. Some models are built around a specific device, such as a phone with a case, a board camera or a console camera, while others rely on a generic clamp or a screw thread.

On the author's model page, look at the listed dimensions, the number of parts and whether the model needs supports. Check the material and settings the author mentions, and look at photos of real prints to see how the joints and the base behave. A wide base and thick walls matter more than a long arm, because a heavy phone on a long lever tips the stand over.

If a search returns too much, narrow it with words like tripod, arm, clamp, gimbal, slider or overhead rig. Related terms help as well: phone holder, camera mount, board camera case, magnetic adapter, or the name of the device you own. You can also search by where the stand is used — desk, wall, ceiling or car — and by the joint type, such as ball head or swivel base.

FAQ

Frequently asked questions

What should I check before printing a phone or camera stand?
Look at the dimensions, the part count and the assembly notes on the model page. Check whether the author lists supports, material and settings, and look at photos of finished prints.
Which material is usually used for these stands?
Authors often list PLA for desk stands and PETG where a part has to bend or take a knock. The choice also depends on your printer and on the temperature where the stand will sit.
How do I match a stand to my phone or camera?
Measure the width and thickness of the device, including the case, and compare it with the dimensions in the model description. If the model is parametric or comes in several sizes, pick the closest one and scale it in the slicer.
Do these models need supports?
It varies: flat-printed bases and arms often print without them, while overhangs on clamps and hinges may need support. The author's page usually states this, and the print orientation in the photos shows how the part was laid out.
Related
Objects

3D Models of Stands with Mounts and Holders

776103 models
Printer parts

3D Models for Spool and Reel Stands

3701 models
Office & desk

3D Models for Headphone Stands and Desk Holders

7583 models
Home & household

Remote Control Stand 3D Models and STL Files

12015 models
Home & household

Rack Post Caps: 3D Models and STL Files for 3D Printing

2679 models
Home & household

Tape Holder and Dispenser 3D Models to Print

7582 models

All 3D model categories

The full catalog of topics — from home & household to CNC, searchable across the connected sources.

Open the category catalog