Gadgets

Camera and Phone Stand 3D Models to Print

This collection gathers 3D models for camera and phone stands: desk holders, tripods, arms and mounts for small cameras. Most files are made for FDM 3D printing and come as STL, so you can adjust the scale in a slicer before you print. It helps when you need a fixed angle for recording, streaming or photographing small parts. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 3 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 15/10/2026

Ver a coleção Mostrar todos: 10655 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 10655 modelos
Sobre a categoria

«Camera and Phone Stand 3D Models to Print»

Desk stands keep a phone or a small camera upright at a set angle, while tripod and arm mounts move the device away from the table. Foldable designs pack flat and often use printed hinges or sliding locks; fixed stands are simpler and need fewer parts. Some models are built around a specific device, such as a phone with a case, a board camera or a console camera, while others rely on a generic clamp or a screw thread.

On the author's model page, look at the listed dimensions, the number of parts and whether the model needs supports. Check the material and settings the author mentions, and look at photos of real prints to see how the joints and the base behave. A wide base and thick walls matter more than a long arm, because a heavy phone on a long lever tips the stand over.

If a search returns too much, narrow it with words like tripod, arm, clamp, gimbal, slider or overhead rig. Related terms help as well: phone holder, camera mount, board camera case, magnetic adapter, or the name of the device you own. You can also search by where the stand is used — desk, wall, ceiling or car — and by the joint type, such as ball head or swivel base.

FAQ

Perguntas frequentes

What should I check before printing a phone or camera stand?
Look at the dimensions, the part count and the assembly notes on the model page. Check whether the author lists supports, material and settings, and look at photos of finished prints.
Which material is usually used for these stands?
Authors often list PLA for desk stands and PETG where a part has to bend or take a knock. The choice also depends on your printer and on the temperature where the stand will sit.
How do I match a stand to my phone or camera?
Measure the width and thickness of the device, including the case, and compare it with the dimensions in the model description. If the model is parametric or comes in several sizes, pick the closest one and scale it in the slicer.
Do these models need supports?
It varies: flat-printed bases and arms often print without them, while overhangs on clamps and hinges may need support. The author's page usually states this, and the print orientation in the photos shows how the part was laid out.
Relacionados
Objetos

3D Models of Stands with Mounts and Holders

776103 modelos
Peças para impressoras

3D Models for Spool and Reel Stands

3701 modelos
Escritório e home office

3D Models for Headphone Stands and Desk Holders

7583 modelos
Casa e utilidades

Remote Control Stand 3D Models and STL Files

12015 modelos
Casa e utilidades

Rack Post Caps: 3D Models and STL Files for 3D Printing

2679 modelos
Casa e utilidades

Tape Holder and Dispenser 3D Models to Print

7582 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias