Ball Gear Fidget Toy V2

3D model description

• This is a model of the Ball Gear Fidget Toy. You can play with it to reduce stress.

• You may have difficulty assembling the joints if the plastic you are using is a bit hard, don't worry, use a hair dryer to soften them and it will be easier.

• You do not need to add support to the model. This is a print-in-place model.

• You can add a brim for better adhesion.

3D printing settings

Please scale up by 150% if you can't see the digits after printing.

- Print in place

- No support

FDM printer

PLA filament

NOZZLE: 0.4; 0.20 initial layer height

Infill density: 10%

Retraction: standard for PLA

Nozzle temperature 220° for Hyper PLA or the temperature specified by the manufacturer for your filament.

No need to add support

Use paper glue or hairspray on the print bed for better adhesion.