Square Gear Fidget Toy

3D model description

• This is a model of the Square Gear Fidget Toy. You can play with it to reduce stress.

• You may have difficulty assembling the joints if the plastic you are using is a bit hard, don't worry, use a hair dryer to soften them and it will be easier.

• You do not need to add support to the model. This is print in place model. You can add the

brim to stick better.

3D printing settings

Please scale up 150% if you can't see the digits after printing.

- Print in place

- No support

FDM printer

PLA filament

NOZZLE: 0.4; 0.20 initial layer height

Infill density: 10%

Retraction: standard for PLA

Nozzle temperature 220° for Hyper PLA or the temperature specified by the manufacturer on your plastic.

No need to add support

Use paper glue or hair spray on the print bed for stick better.