Skeletal Unicorn My Little Pony -No AMS-Multicolor

Skeletal Unicorn Pony Figurine

A spooky twist on a magical classic – this 3D printed skeletal unicorn pony combines eerie bone details with a touch of fantasy charm. The model is available in two styles: a pure white edition and a striking dual-tone grey-and-white version. Optimized for FDM printing, it does not require AMS. The figure is printed in separate parts that need to be glued together for final assembly. Whether you’re into creepy-cute collectibles, Halloween décor, or fantasy figures, this skeletal unicorn pony will make a hauntingly adorable addition to your collection.

Download now and bring this creepy-cute unicorn skeleton to life!

Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT 2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

- Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

Recommendations:

- - 0.08-0.2. In the event of changing the original height, the height of the supports should be changed. - PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

- Clean the plate thoroughly before printing. Make sure the filament is dry and free from dirt. This can damage the print or weaken the support