94-2000 Acura Integra door handle — Image 2 of 8

94-2000 Acura Integra door handle — Image 3 of 8

94-2000 Acura Integra door handle — Image 4 of 8

94-2000 Acura Integra door handle — Image 5 of 8

94-2000 Acura Integra door handle — Image 6 of 8

94-2000 Acura Integra door handle — Image 7 of 8

3D model · MakerWorld

94-2000 Acura Integra door handle

Platform: MakerWorld
Price: Free
License: CC-BY-NC-SA; Non-commercial use only, with credit; share remixes under the same license.
Formats: STL

103 Likes
226 Downloads
60 Makes
183 Collected
6 Boosts
20 Comments
0 Views

Author:N3RD solutions

Published 2023-09-27

Download on MakerWorld

Description

This is a 3D scan of an Acura Integra outside door handle that is discontinued from the factory and you can't find these in junk yards or even Ebay anymore. So I found one and scanned it. If you need the other side, you can mirror the part and have both handles.

Save the classic Hondas!!! lol

Hopefully someone will be able to get into their car easier now. :)

Guides and print profiles

Print profiles and steps

0.2mm layer, 6 walls, 50% infill this print profile is both passenger and driver door handles. with each plate labeled respectively.

this uses “strong” tree supports, as i struggled over 8 times using normal support and abs.

along with 6 walls (because its a very active component) and 50% infill to withstand the forces.

this is auto orientated and arranged for best positioning and clean external look.

I HIGHLY RECOMMEND SLOWING DOWN TO 50% SPEED UNTILL YOU GET TO LAYER 324. THIS IS WHERE THE 2 PARTS CONNECT. after this layer it will be strong enough to support the faster movements of the printer. (this was tested on a x1c, maybe a1 series don't need to be slowed down)