Бесплатно 
Acura Integra / Civic EG 6.5" Door Speaker Adapter
MakerWorld
3D-модель · MakerWorld
94-2000 Acura Integra door handle
Сведения о модели
- Площадка
MakerWorld
- Цена
- Бесплатно
- Лицензия
- CC-BY-NC-SA
- Только некоммерческое использование с указанием автора; переделки — под той же лицензией.
- Форматы
- STL
- 103 Лайки
- 226 Загрузки
- 60 Напечатали
- 183 В подборках
- 6 Бусты
- 20 Комментарии
- 0 Просмотры
Описание
This is a 3D scan of an Acura Integra outside door handle that is discontinued from the factory and you can't find these in junk yards or even Ebay anymore. So I found one and scanned it. If you need the other side, you can mirror the part and have both handles.
Save the classic Hondas!!! lol
Hopefully someone will be able to get into their car easier now. :)
Руководства и профили печати
Профили печати и шаги
0.2mm layer, 6 walls, 50% infill this print profile is both passenger and driver door handles. with each plate labeled respectively.
this uses “strong” tree supports, as i struggled over 8 times using normal support and abs.
along with 6 walls (because its a very active component) and 50% infill to withstand the forces.
this is auto orientated and arranged for best positioning and clean external look.
I HIGHLY RECOMMEND SLOWING DOWN TO 50% SPEED UNTILL YOU GET TO LAYER 324. THIS IS WHERE THE 2 PARTS CONNECT. after this layer it will be strong enough to support the faster movements of the printer. (this was tested on a x1c, maybe a1 series don't need to be slowed down)
Похожие модели
Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.