Aces Cards Slider + Flip Fidget (Print in Place)

Let this fully cool after print (you can remove from the build plate) and rotate the hinges – NOT the pin – and then press the pin between your fingers to break the supports (don’t twist the pin – see image below). If you have filament and settings dialed in you can also gently twist the pin until you feel a little resistance (do not over twist), then twist the other way gently until it fully loosens. The hinges should move just fine. The more you play with it, the more it will loosen. PLA will work great. Some filaments will allow movement right after the print.   If you have issues, please contact me and happy to help.

The Ace Up Your Sleeve Slider + Flip Fidget ♠️♦️♣️♥️

Shuffle up some fun — this little stack of Aces is dealing out pure fidget magic.

Flip it, slide it, twirl it, rotate it, twist it… heck, let it slip through your fingers like a magician mid-trick. Whether you're bluffing your way through a meeting or just need something to keep your hands busy, this pocket-sized deck delivers “four of a kind” satisfying twists and smooth slides.

This ~40 minute quick print-in-place design uses three colors to really suit up your stack—because even your fidgets deserve a little flair. Go ahead — stack the deck and fidget away.