Joker Card Slider + Flip Fidget (Print in Place)

Let this fully cool after print (you can remove from the build plate) and rotate the hinges – NOT the pin – and then press the pin between your fingers to break the supports (don’t twist the pin – see image below). If you have filament and settings dialed in you can also gently twist the pin until you feel a little resistance (do not over twist), then twist the other way gently until it fully loosens. The hinges should move just fine. The more you play with it, the more it will loosen. PLA will work great. Some filaments will allow movement right after the print.   If you have issues, please contact me and happy to help.

Why play by the rules when you are the wildcard? This Joker slider + flip fidget is ready to deal out chaos — in the best way. Flip it, slide it, twirl it, rotate it, twist it, and let it slip right through your fingers like a perfectly executed bluff. One side brings the mischief with a Joker, the other keeps it classic with a standard card — because every good trick needs a little balance. ♠️♥️♣️♦️

This quick print-in-place design comes together fast in two color AMS, so you can spend less time waiting and more time fidgeting like a card shark with a nervous tell. Whether you're stacking the deck or just killing time, this one’s no joke… okay, maybe a little.